Correlation of SWIR imaging with LPBF 304L stainless steel part properties

[1]  Ken Cooper,et al.  EVALUATIONS OF TEMPERATURE MEASUREMENTS BY NEAR-INFRARED THERMOGRAPHY IN POWDER-BASED ELECTRON-BEAM ADDITIVE MANUFACTURING , 2012 .

[2]  M. F. Zaeh,et al.  Thermography for Monitoring the Selective Laser Melting Process , 2012 .

[3]  Tom Craeghs,et al.  Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring , 2012 .

[4]  Bo Cheng,et al.  On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Process Parameter Effects , 2014 .

[5]  Steven Price,et al.  Evaluations of temperature measurements in powder-based electron beam additive manufacturing by near-infrared thermography , 2014 .

[6]  Michael F. Zaeh,et al.  Layerwise Monitoring of the Selective Laser Melting Process by Thermography , 2014 .

[7]  Volker Carl,et al.  Monitoring system for the quality assessment in additive manufacturing , 2015 .

[8]  I. Zhirnov,et al.  Determination of True Temperature in Selective Laser Melting of Metal Powder Using Infrared Camera , 2015 .

[9]  Michael F. Zaeh,et al.  Thermographic process monitoring in powderbed based additive manufacturing , 2015 .

[10]  E. Rodriguez,et al.  Approximation of absolute surface temperature measurements of powder bed fusion additive manufacturing technology using in situ infrared thermography , 2015 .

[11]  Ryan B. Wicker,et al.  Analysis and correction of defects within parts fabricated using powder bed fusion technology , 2015 .

[12]  Sergey N. Grigoriev,et al.  Parametric analysis of SLM using comprehensive optical monitoring , 2016 .

[13]  Shawn Moylan,et al.  Thermographic Measurements of the Commercial Laser Powder Bed Fusion Process at NIST. , 2015, Rapid prototyping journal.

[14]  James M. Fraser,et al.  In situ morphology-based defect detection of selective laser melting through inline coherent imaging , 2016 .

[15]  A. Beese,et al.  Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing , 2016 .

[16]  IN SITU MELT POOL MONITORING AND THE CORRELATION TO PART DENSITY OF INCONEL ® 718 FOR QUALITY ASSURANCE IN SELECTIVE LASER MELTING , 2017 .

[17]  Bianca Maria Colosimo,et al.  On the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion , 2017 .

[18]  J. Schoenung,et al.  In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing , 2017 .

[19]  Brandon M. Lane,et al.  The effect of powder on cooling rate and melt pool length measurements using in situ thermographic techniques | NIST , 2017 .

[20]  A. Nassar,et al.  Flaw detection in powder bed fusion using optical imaging , 2017 .

[21]  A. Plotkowski,et al.  Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing , 2017, Scientific Reports.

[22]  Quirico Semeraro,et al.  In-process Monitoring of Selective Laser Melting: Spatial Detection of Defects via Image Data Analysis , 2017 .

[23]  Prahalada Rao,et al.  Sensor-Based Build Condition Monitoring in Laser Powder Bed Fusion Additive Manufacturing Process Using a Spectral Graph Theoretic Approach , 2018, Journal of Manufacturing Science and Engineering.

[24]  Paul W. C. Northrop,et al.  Infrared thermal imaging for melt pool analysis in SLM: a feasibility investigation , 2018 .

[25]  Sheng Liu,et al.  In Situ 3D Monitoring of Geometric Signatures in the Powder-Bed-Fusion Additive Manufacturing Process via Vision Sensing Methods , 2018, Sensors.

[26]  Linkan Bian,et al.  Dual process monitoring of metal-based additive manufacturing using tensor decomposition of thermal image streams , 2018, Additive Manufacturing.

[27]  Bianca Maria Colosimo,et al.  In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume , 2018 .

[28]  Effects of Thermal Camera Resolution on Feature Extraction in Selective Laser Melting , 2018 .

[29]  Iain Todd,et al.  Thermal near infrared monitoring system for electron beam melting with emissivity tracking , 2018, Additive Manufacturing.

[30]  S. Coeck,et al.  Correlation of selective laser melting-melt pool events with the tensile properties of Ti-6Al-4V ELI processed by laser powder bed fusion , 2018, Additive Manufacturing.

[31]  Shashi Phoha,et al.  Application of supervised machine learning for defect detection during metallic powder bed fusion additive manufacturing using high resolution imaging. , 2018 .

[32]  Ali Gökhan Demir,et al.  Design and Implementation of a Multisensor Coaxial Monitoring System With Correction Strategies for Selective Laser Melting of a Maraging Steel , 2018 .

[33]  Remy Fabbro,et al.  Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process , 2018 .

[34]  J. Ni,et al.  A study on the effect of energy input on spatter particles creation during selective laser melting process , 2018 .

[35]  Yellapu V. Murty,et al.  In situ defect detection in selective laser melting via full-field infrared thermography , 2018, Additive Manufacturing.

[36]  Measurement of Thermal Processing Variability in Powder Bed Fusion | NIST , 2018 .

[37]  Paul W. C. Northrop,et al.  Melt pool sensing and size analysis in laser powder-bed metal additive manufacturing , 2018 .

[38]  Geok Soon Hong,et al.  In situ monitoring of selective laser melting using plume and spatter signatures by deep belief networks. , 2018, ISA transactions.

[39]  Brandon M. Lane,et al.  Measurement of the Melt Pool Length During Single Scan Tracks in a Commercial Laser Powder Bed Fusion Process , 2017 .

[40]  S. Babu,et al.  Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations , 2018, Metallurgical and Materials Transactions A.

[41]  Hui Yang,et al.  Process Mapping and In-Process Monitoring of Porosity in Laser Powder Bed Fusion Using Layerwise Optical Imaging , 2018, Journal of Manufacturing Science and Engineering.

[42]  P. Hooper.  Melt pool temperature and cooling rates in laser powder bed fusion , 2018, Additive Manufacturing.

[43]  M. L. Nai,et al.  Scanning optical microscopy for porosity quantification of additively manufactured components , 2018 .

[44]  N. Nguyen,et al.  Optical in-situ monitoring and correlation of density and mechanical properties of stainless steel parts produced by selective laser melting process based on varied energy density , 2019, Journal of Materials Processing Technology.

[45]  Jack Beuth,et al.  Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process , 2019, Additive Manufacturing.

[46]  V. Paquit,et al.  Approach to qualification using E-PBF in-situ process monitoring in Ti-6Al-4V , 2019, Additive Manufacturing.

[47]  Geok Soon Hong,et al.  In-situ monitoring of laser-based PBF via off-axis vision and image processing approaches , 2019, Additive Manufacturing.

[48]  Alaa Elwany,et al.  Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing , 2019, Journal of Manufacturing Science and Engineering.

[49]  Bianca Maria Colosimo,et al.  A statistical learning method for image-based monitoring of the plume signature in laser powder bed fusion , 2019, Robotics and Computer-Integrated Manufacturing.

[50]  S. Coeck,et al.  Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data , 2019, Additive Manufacturing.