Wi-Fi-based positioning in underground mine tunnels

The Owl Positioning System (OwlPS) was originally designed as a general-purpose Wi-Fi-based indoor positioning system. It is also a tool to compare several positioning techniques from the same input data, and was used for this purpose in previous work. In this work, OwlPS is adapted to a very specific “indoor” environment, namely underground mine tunnels, which brings its own problematics in terms of radio signal propagation and therefore impacts positioning system design. Experiment were conducted at a formerly exploited gold mine, at 70 metres under ground level, across about 400 metres of drifts. Several scenarios were defined to mimic typical use cases.

[1]  Philippe Canalda,et al.  Benchmark measurements for Wi-Fi signal strength-based positioning system , 2012, 2012 International Conference on Indoor Positioning and Indoor Navigation (IPIN).

[2]  Paramvir Bahl,et al.  RADAR: an in-building RF-based user location and tracking system , 2000, Proceedings IEEE INFOCOM 2000. Conference on Computer Communications. Nineteenth Annual Joint Conference of the IEEE Computer and Communications Societies (Cat. No.00CH37064).

[3]  Philippe Canalda,et al.  OwlPS: A Self-calibrated Fingerprint-Based Wi-Fi Positioning System , 2011, EvAAL.

[4]  S. A. Mahmoud.  Characteristics of Electromagnetic Guided Waves for Communication in Coal Mine Tunnels , 1974, IEEE Trans. Commun..

[5]  Walter Grote.  Wireless SISO Channel Propagation Model for Underground Mines , 2009 .

[6]  Frédéric Lassabe,et al.  Open Wireless Positioning System: A Wi-Fi-Based Indoor Positioning System , 2009, 2009 IEEE 70th Vehicular Technology Conference Fall.