An active compliant impact protection system for humanoids: Application to WALK-MAN hands

This paper reports on the development of a new pneumatically actuated impact protection system which can be applied to protect humanoid robots during high impact physical interactions. The proposed device is based on a soft inflating vessel which is integrated and validated on the hands of a humanoid robot WALK-MAN. The system incorporates an active pressure control unit with on-off solenoid valves that permit the regulation of the air pressure of the protection chamber. The impact protection system is smaller and lighter than a rubber-based passive protection previously mounted on the hands, while it offers better impact reduction performance via fast and accurate pressure control. The effectiveness of the system is verified by actual physical interaction experiments with WALK-MAN while the robot is falling against an inclined surface, making contact with its hands to support its body and prevent falling and damage.

[1]  Yasuo Kuniyoshi,et al.  Real-time selection and generation of fall damage reduction actions for humanoid robots , 2008, Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoid Robots.

[2]  Kazuhito Yokoi,et al.  The first human-size humanoid that can fall over safely and stand-up again , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[3]  Masayuki Inaba,et al.  Design and development of a humanoid with Soft 3D-deformable sensor flesh and automatic recoverable mechanical overload protection mechanism , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  R. V. Ham,et al.  Pressure Control with On-Off Valves of Pleated Pneumatic Artificial Muscles in a Modular One-Dimensional Rotational Joint , 2003 .

[5]  Darwin G. Caldwell,et al.  Visual Grasp Affordance Localization in Point Clouds Using Curved Contact Patches , 2017, Int. J. Humanoid Robotics.

[6]  Sven Behnke,et al.  Instability Detection and Fall Avoidance for a Humanoid using Attitude Sensors and Reflexes , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[7]  Nikolaos G. Tsagarakis,et al.  WALK-MAN humanoid lower body design optimization for enhanced physical performance , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[8]  Jörn Malzahn,et al.  WALK‐MAN: A High‐Performance Humanoid Platform for Realistic Environments , 2017, J. Field Robotics.

[9]  Katsu Yamane,et al.  3D printed soft skin for safe human-robot interaction , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[10]  Masayuki Inaba,et al.  Achievement of complex contact motion with environments by musculoskeletal humanoid using humanlike shock absorption strategy , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Nikolaos G. Tsagarakis,et al.  Optically-regulated impedance-based balancing for humanoid robots , 2015, 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids).

[12]  Jae-Bok Song,et al.  Safe joint mechanism using double slider mechanism and spring for humanoid robot arm , 2008, Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoid Robots.

[13]  Umashankar Nagarajan,et al.  Direction-changing fall control of humanoid robots: theory and experiments , 2014, Auton. Robots.

[14]  Nikolaos G. Tsagarakis,et al.  Development and control of a series elastic actuator equipped with a semi active friction damper for human friendly robots , 2014, Robotics Auton. Syst..

[15]  Kazuhito Yokoi,et al.  UKEMI: falling motion control to minimize damage to biped humanoid robot , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Kazuhito Yokoi,et al.  Study of an external passive shock-absorbing mechanism for walking robots , 2008, Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoid Robots.

[17]  Minoru Asada,et al.  CB2: A child robot with biomimetic body for cognitive developmental robotics , 2007, 2007 7th IEEE-RAS International Conference on Humanoid Robots.

[18]  Manuel G. Catalano,et al.  Adaptive synergies for the design and control of the Pisa/IIT SoftHand , 2014, Int. J. Robotics Res..

[19]  Abderrahmane Kheddar,et al.  Falls control using posture reshaping and active compliance , 2015, 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids).

[20]  Robert O. Ambrose,et al.  Robonaut 2 - The first humanoid robot in space , 2011, 2011 IEEE International Conference on Robotics and Automation.

[21]  Ambarish Goswami,et al.  Learning to Predict Humanoid Fall , 2011, Int. J. Humanoid Robotics.

[22]  Gustavo A. Cardona,et al.  Reduction of impact force in falling robots using variable stiffness , 2016, SoutheastCon 2016.

[23]  Qiang Huang,et al.  A torque limiter for safe joint applied to humanoid robots against falling damage , 2015, 2015 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[24]  Jörn Malzahn,et al.  A modular compliant actuator for emerging high performance and fall-resilient humanoids , 2015, 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids).

[25]  H. Ulbrich,et al.  System Design and Control of Anthropomorphic Walking Robot LOLA , 2009, IEEE/ASME Transactions on Mechatronics.