An improved prediction of residual stresses and distortion in additive manufacturing

[1]  Gary S. Schajer,et al.  Application of Finite Element Calculations to Residual Stress Measurements , 1981 .

[2]  T. DebRoy,et al.  Current Issues and Problems in Welding Science , 1992, Science.

[3]  P. Rangaswamy.  HIGH TEMPERATURE STRESS ASSESSMENT IN SCS-6/TI-6A1-4V COMPOSITE USING NEUTRON DIFFRACTION AND FINITE ELEMENT MODELING. , 2000 .

[4]  F. Prinz,et al.  Thermal stresses and deposition patterns in layered manufacturing , 2001 .

[5]  P. Withers,et al.  Residual stress. Part 1 – Measurement techniques , 2001 .

[6]  K. Mills.  Recommended Values of Thermophysical Properties for Selected Commercial Alloys , 2001 .

[7]  W. G. Frazier,et al.  Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure , 2002 .

[8]  Phil E. Irving,et al.  The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints , 2003 .

[9]  Tso-Liang Teng,et al.  Numerical and experimental investigations on the residual stresses of the butt-welded joints , 2004 .

[10]  I. Green,et al.  A Finite Element Study of the Residual Stress and Deformation in Hemispherical Contacts , 2005 .

[11]  Mohammad Pervez Mughal,et al.  Deformation modelling in layered manufacturing of metallic parts using gas metal arc welding: effect of process parameters , 2005 .

[12]  J. Choi,et al.  Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process , 2005 .

[13]  Michael B. Prime,et al.  Residual stresses in LENS® components using neutron diffraction and contour method , 2005 .

[14]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[15]  Hidekazu Murakawa,et al.  Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements , 2006 .

[16]  Jack Beuth,et al.  Process Maps for Predicting Residual Stress and Melt Pool Size in the Laser-Based Fabrication of Thin-Walled Structures , 2007 .

[17]  E. Toyserkani,et al.  A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process , 2007 .

[18]  Sergio D. Felicelli,et al.  Residual stresses in LENS-deposited AISI 410 stainless steel plates , 2008 .

[19]  D. Lados,et al.  Effects of microstructure on the fatigue crack growth behavior of light metals and design considerations , 2010 .

[20]  Paul A. Colegrove,et al.  Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts , 2011 .

[21]  M. Preuss,et al.  Residual stresses in laser direct metal deposited Waspaloy , 2011 .

[22]  S. Marimuthu,et al.  A numerical investigation into residual stress characteristics in laser deposited multiple layer waspaloy parts , 2011 .

[23]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[24]  Wei Zhang,et al.  Evaluation of residual plastic strain distribution in dissimilar metal weld by hardness mapping , 2013, Science and Technology of Welding and Joining.

[25]  Todd Palmer,et al.  Heat transfer and fluid flow in additive manufacturing , 2013 .

[26]  H. Maier,et al.  On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance , 2013 .

[27]  Mamidala Ramulu,et al.  Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance , 2013 .

[28]  A. Al-Mukhtar.  Residual Stresses and Stress Intensity Factor Calculations in T-Welded Joints , 2013, Journal of Failure Analysis and Prevention.

[29]  Amitava De,et al.  Heat transfer and material flow during laser assisted multi-layer additive manufacturing , 2014 .

[30]  W. King,et al.  An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel , 2014, Metallurgical and Materials Transactions A.

[31]  Thomas Tröster,et al.  On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting , 2014 .

[32]  Muhammad Tahir Khan,et al.  Corrigendum to “Experimental Study of Direct Laser Deposition of Ti-6Al-4V and Inconel 718 by Using Pulsed Parameters” , 2015, TheScientificWorldJournal.

[33]  Ryan R. Dehoff,et al.  Computational modeling of residual stress formation during the electron beam melting process for Inconel 718 , 2015 .

[34]  E. A. Payzant,et al.  Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering , 2015, Metallurgical and Materials Transactions A.

[35]  A. De,et al.  Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process , 2015 .

[36]  S. Pannala,et al.  The metallurgy and processing science of metal additive manufacturing , 2016 .

[37]  T. Mukherjee,et al.  Printability of alloys for additive manufacturing , 2016, Scientific Reports.

[38]  John W. Elmer,et al.  Origin of grain orientation during solidification of an aluminum alloy , 2016 .

[39]  Q. Pei,et al.  Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling , 2016 .

[40]  M. Kottman,et al.  Experimental study and modeling of H13 steel deposition using laser hot-wire additive manufacturing , 2016 .

[41]  Sanjooram Paddea,et al.  Fatigue crack propagation behaviour in wire+arc additive manufactured Ti‐6Al‐4V: Effects of microstructure and residual stress , 2016 .

[42]  Amitava De,et al.  Mitigation of thermal distortion during additive manufacturing , 2017 .

[43]  S. Tavares,et al.  Residual Stress , 2018, SpringerBriefs in Applied Sciences and Technology.