Life cycle assessment of high capacity molybdenum disulfide lithium-ion battery for electric vehicles

[1]  Jinghong Li,et al.  Facilitated Lithium Storage in MoS2 Overlayers Supported on Coaxial Carbon Nanotubes , 2007 .

[2]  Giampaolo Manzolini,et al.  Energy analysis of electric vehicles using batteries or fuel cells through well-to-wheel driving cycle simulations , 2009 .

[3]  Kebin He,et al.  Environmental implication of electric vehicles in China. , 2010, Environmental science & technology.

[4]  Dominic A. Notter,et al.  Contribution of Li-ion batteries to the environmental impact of electric vehicles. , 2010, Environmental science & technology.

[5]  Henk Nijmeijer,et al.  Design of an efficient, low weight battery electric vehicle based on a VW Lupo 3L , 2010 .

[6]  Randall Guensler,et al.  Electric vehicles: How much range is required for a day’s driving? , 2011 .

[7]  Hua Ma,et al.  Rechargeable Mg Batteries with Graphene‐like MoS2 Cathode and Ultrasmall Mg Nanoparticle Anode , 2011, Advanced materials.

[8]  Jaephil Cho,et al.  MoS₂ nanoplates consisting of disordered graphene-like layers for high rate lithium battery anode materials. , 2011, Nano letters.

[9]  Yu‐Guo Guo,et al.  Facile synthesis of MoS2@CMK-3 nanocomposite as an improved anode material for lithium-ion batteries. , 2012, Nanoscale.

[10]  J. McCaffery,et al.  Heteroaggregation of multiwalled carbon nanotubes and hematite nanoparticles: rates and mechanisms. , 2012, Environmental science & technology.

[11]  John Sullivan,et al.  Impact of recycling on cradle-to-gate energy consumption and greenhouse gas emissions of automotive lithium-ion batteries. , 2012, Environmental science & technology.

[12]  L. Gaines,et al.  Status of life cycle inventories for batteries , 2012 .

[13]  Menachem Elimelech,et al.  New perspectives on nanomaterial aquatic ecotoxicity: production impacts exceed direct exposure impacts for carbon nanotoubes. , 2012, Environmental science & technology.

[14]  Roland Hischier,et al.  Life cycle assessment of engineered nanomaterials: state of the art and strategies to overcome existing gaps. , 2012, The Science of the total environment.

[15]  C. Vandecasteele,et al.  Removal of Molybdate Anions from Water by Adsorption on Zeolite‐Supported Magnetite , 2012, Water environment research : a research publication of the Water Environment Federation.

[16]  Foivos Markoulidis,et al.  Ecological Assessment of Nano Materials for the Production of Electrostatic/Electrochemical Energy Storage Systems , 2013 .

[17]  Feihe Huang,et al.  Graphene-like MoS₂/graphene composites: cationic surfactant-assisted hydrothermal synthesis and electrochemical reversible storage of lithium. , 2013, Small.

[18]  Nicklas Raun Jacobsen,et al.  Bioaccumulation and ecotoxicity of carbon nanotubes , 2013, Chemistry Central Journal.

[19]  S. K. Srivastava,et al.  MoS2-MWCNT hybrids as a superior anode in lithium-ion batteries. , 2013, Chemical communications.

[20]  C. Rao,et al.  Graphene analogues of inorganic layered materials. , 2013, Angewandte Chemie.

[21]  Hyung Chul Kim,et al.  Life-cycle energy and greenhouse gas emission benefits of lightweighting in automobiles: review and harmonization. , 2013, Environmental science & technology.

[22]  J. Coleman,et al.  Development of MoS2–CNT Composite Thin Film from Layered MoS2 for Lithium Batteries , 2013 .

[23]  Oliver G. Schmidt,et al.  Hierarchical MoS2/Polyaniline Nanowires with Excellent Electrochemical Performance for Lithium‐Ion Batteries , 2013, Advanced materials.

[24]  Troy R. Hawkins,et al.  Comparative Environmental Life Cycle Assessment of Conventional and Electric Vehicles , 2013 .

[25]  Wenhui Shi,et al.  Preparation of MoS2-coated three-dimensional graphene networks for high-performance anode material in lithium-ion batteries. , 2013, Small.

[26]  Thomas Franke,et al.  What drives range preferences in electric vehicle users , 2013 .

[27]  S. Glöser,et al.  Dynamic analysis of global copper flows. Global stocks, postconsumer material flows, recycling indicators, and uncertainty evaluation. , 2013, Environmental science & technology.

[28]  Robert Vajtai,et al.  Graphene‐Network‐Backboned Architectures for High‐Performance Lithium Storage , 2013, Advanced materials.

[29]  Arturo A. Keller,et al.  Release of engineered nanomaterials from personal care products throughout their life cycle , 2014, Journal of Nanoparticle Research.

[30]  Lars Ole Valøen,et al.  Life Cycle Assessment of a Lithium‐Ion Battery Vehicle Pack , 2014 .

[31]  R. Graves,et al.  Well-to-wheel analysis of direct and indirect use of natural gas in passenger vehicles , 2014 .

[32]  B. Tay,et al.  A binder-free CNT network-MoS2 composite as a high performance anode material in lithium ion batteries. , 2014, Chemical communications.

[33]  Albert A Koelmans,et al.  Simplifying modeling of nanoparticle aggregation-sedimentation behavior in environmental systems: a theoretical analysis. , 2014, Water research.

[34]  Brian C. Olsen,et al.  Lithium ion battery applications of molybdenum disulfide (MoS2) nanocomposites , 2014 .

[35]  Anming Hu,et al.  Si-Based Anode Materials for Li-Ion Batteries: A Mini Review , 2014, Nano-Micro Letters.

[36]  Wenquan Lu,et al.  Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review , 2014 .

[37]  P. Ajayan,et al.  A Bottom‐Up Approach to Build 3D Architectures from Nanosheets for Superior Lithium Storage , 2014 .

[38]  Lixia Yuan,et al.  Synthesis of hierarchical MoS2 and its electrochemical performance as an anode material for lithium-ion batteries , 2014 .

[39]  Min-Sang Song,et al.  Unconventional pore and defect generation in molybdenum disulfide: application in high-rate lithium-ion batteries and the hydrogen evolution reaction. , 2014, ChemSusChem.

[40]  L. Gaines,et al.  Material and Energy Flows in the Production of Cathode and Anode Materials for Lithium Ion Batteries , 2014 .

[41]  S. Hellweg,et al.  Emerging approaches, challenges and opportunities in life cycle assessment , 2014, Science.

[42]  Nathalie Tufenkji,et al.  The road to nowhere: equilibrium partition coefficients for nanoparticles , 2014 .

[43]  C. Yuan,et al.  Life cycle environmental impact of high-capacity lithium ion battery with silicon nanowires anode for electric vehicles. , 2014, Environmental science & technology.

[44]  D. Bouchard,et al.  Heteroaggregation of multiwalled carbon nanotubes with sediments , 2015 .

[45]  Apurba Sakti,et al.  A techno-economic analysis and optimization of Li-ion batteries for light-duty passenger vehicle electrification , 2015 .

[46]  Kevin G. Gallagher,et al.  Critical Link between Materials Chemistry and Cell-Level Design for High Energy Density and Low Cost Lithium-Sulfur Transportation Battery , 2015 .

[47]  Yuanyuan Xie,et al.  A three-dimensionally interconnected carbon nanotube/layered MoS2 nanohybrid network for lithium ion battery anode with superior rate capacity and long-cycle-life , 2015 .

[48]  B. Choi,et al.  Ultrathin MoS2@C layered structure as an anode of lithium ion battery , 2015 .

[49]  S. Mitra,et al.  Exfoliated MoS2 Sheets and Reduced Graphene Oxide-An Excellent and Fast Anode for Sodium-ion Battery , 2015, Scientific Reports.

[50]  Arumugam Manthiram,et al.  Lithium–Sulfur Batteries: Progress and Prospects , 2015, Advanced materials.

[51]  Y. Kang,et al.  Polystyrene-Templated Aerosol Synthesis of MoS2 -Amorphous Carbon Composite with Open Macropores as Battery Electrode. , 2015, ChemSusChem.

[52]  Zaiping Guo,et al.  Synthesis and electrochemical performances of MoS2/C fibers as anode material for lithium-ion battery , 2016 .

[53]  Yong‐Mook Kang,et al.  Synthesis and electrochemical performance of colloidal MoS2 nanosheets as an anode material in sodium ion battery , 2016 .

[54]  Yong Jiang,et al.  Facile synthesis of ultrathin, undersized MoS2/graphene for lithium-ion battery anodes , 2016 .

[55]  G. Wang,et al.  Half-cell and full-cell investigations of 3D hierarchical MoS2/graphene composite on anode performance in lithium-ion batteries , 2016 .

[56]  Wenwei Ke,et al.  Real-world performance of battery electric buses and their life-cycle benefits with respect to energy consumption and carbon dioxide emissions , 2016 .

[57]  Zhaolin Li,et al.  MoS2 Nanosheets Vertically Grown on Graphene Sheets for Lithium-Ion Battery Anodes. , 2016, ACS nano.

[58]  Yang Li,et al.  Molybdenum disulfide nanosheet embedded three-dimensional vertically aligned carbon nanotube arrays for extremely-excellent cycling stability lithium-ion anodes , 2016 .

[59]  Xiongwen Zhang,et al.  A comparative assessment of battery and fuel cell electric vehicles using a well-to-wheel analysis , 2016 .

[60]  S. Dou,et al.  MoS2 with an intercalation reaction as a long-life anode material for lithium ion batteries , 2016 .

[61]  Chris Yuan,et al.  Deriving characterization factors on freshwater ecotoxicity of graphene oxide nanomaterial for life cycle impact assessment , 2017, The International Journal of Life Cycle Assessment.

[62]  Ivan Muñoz,et al.  A model and tool to calculate life cycle inventories of chemicals discharged down the drain , 2017, The International Journal of Life Cycle Assessment.

[63]  L. Sala,et al.  Removal of molybdate anions from contaminated waters by brown algae biomass in batch and continuous processes , 2017 .