Geometry and Kinematic Analysis of a Redundantly Actuated Parallel Mechanism That Eliminates Singularities and Improves Dexterity

This paper investigates the behavior of a type of parallel mechanisms with a central strut. The mechanism is of lower mobility, redundantly actuated, and used for sprained ankle rehabilitation. Singularity and dexterity are investigated for this type of parallel mechanisms based on the Jacobian matrix in terms of rank deficiency and condition number, throughout the workspace. The non-redundant cases with three and two limbs are compared with the redundantly actuated case with three limbs. The analysis demonstrates the advantage of introducing the actuation redundancy to eliminate singularities and to improve dexterity and justifies the choice of the presented mechanism for ankle rehabilitation.

[1]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[2]  Jack Phillips,et al.  Freedom in machinery , 1984 .

[3]  Vincent Hayward,et al.  Multiple-goal kinematic optimization of a parallel spherical mechanism with actuator redundancy , 1992, IEEE Trans. Robotics Autom..

[4]  Sukhan Lee,et al.  Kinematic feature analysis of parallel manipulator systems , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[5]  Byung-Ju Yi,et al.  Optimal kinematic design of an anthropomorphic robot module with redundant actuators , 1997 .

[6]  Claude Reboulet,et al.  Optimal design of a redundant spherical parallel manipulator , 1997, Robotica.

[7]  Grigore C. Burdea,et al.  The “Rutgers Ankle” Orthopedic Rehabilitation Interface , 1999, Dynamic Systems and Control.

[8]  Jian S. Dai,et al.  A six-component contact force measurement device based on the Stewart platform , 2000 .

[9]  Zexiang Li,et al.  Dynamics and control of redundantly actuated parallel manipulators , 2003 .

[10]  Jian S. Dai,et al.  Sprained Ankle Physiotherapy Based Mechanism Synthesis and Stiffness Analysis of a Robotic Rehabilitation Device , 2004, Auton. Robots.

[11]  C. Gosselin,et al.  Kinematic Analysis and Design of Kinematically Redundant Parallel Mechanisms , 2004 .

[12]  Jungwon Yoon,et al.  A Novel Reconfigurable Ankle/Foot Rehabilitation Robot , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[13]  Damien Chablat,et al.  Design of a Spherical Wrist with Parallel Architecture: Application to Vertebrae of an Eel Robot , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[14]  H. Lipkin,et al.  Mobility of Overconstrained Parallel Mechanisms , 2006 .

[15]  Xiaojun Zhang,et al.  Design and Kinematics Analysis of Parallel Robots for Ankle Rehabilitation , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  J. Merlet.  Jacobian, Manipulability, Condition Number and Accuracy of Parallel Robots , 2005, ISRR.