Control of a hydraulically-actuated quadruped robot leg

This paper is focussed on the modelling and control of a hydraulically-driven biologically-inspired robotic leg. The study is part of a larger project aiming at the development of an autonomous quadruped robot (hyQ) for outdoor operations. The leg has two hydraulically-actuated degrees of freedom (DOF), the hip and knee joints. The actuation system is composed of proportional valves and asymmetric cylinders. After a brief description of the prototype leg, the paper shows the development of a comprehensive model of the leg where critical parameters have been experimentally identified. Subsequently the leg control design is presented. The core of this work is the experimental assessment of the pros and cons of single-input single-output (SISO) vs. multiple-input multiple-output (MIMO) and linear vs. nonlinear control algorithms in this application (the leg is a coupled multivariable system driven by nonlinear actuators). The control schemes developed are a conventional PID (linear SISO), a Linear Quadratic Regulator (LQR) controller (linear MIMO) and a Feedback Linearisation (FL) controller (nonlinear MIMO). LQR performs well at low frequency but its behaviour worsens at higher frequencies. FL produces the fastest response in simulation, but when implemented is sensitive to parameters uncertainty and needs to be properly modified to achieve equally good performance also in the practical implementation.

[1]  Bernard Friedland,et al.  Control System Design: An Introduction to State-Space Methods , 1987 .

[2]  Christopher G. Atkeson,et al.  Compliant control of a hydraulic humanoid joint , 2007, 2007 7th IEEE-RAS International Conference on Humanoid Robots.

[3]  Kevin Blankespoor,et al.  BigDog, the Rough-Terrain Quadruped Robot , 2008 .

[4]  Sylvie Sesmat,et al.  SIMULATION AND EXPERIMENTAL STUDY OF THE PARTIAL EQUILIBRIUM OF AN ELECTROPNEUMATIC POSITIONINGSYSTEM, CAUSE OF THE STICKING AND RESTARTING PHENOMENON , 1999 .

[5]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[6]  H. Benjamin Brown,et al.  Experiments in Balance with a 3D One-Legged Hopping Machine , 1984 .

[7]  Jui-Chung Hung.  Practical industrial control techniques , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[8]  Andrew Plummer.  Robust electrohydraulic force control , 2007 .

[9]  Heikki Kauranne,et al.  Experimental validation of different models for effective bulk modulus of hydraulic fluid , 2005 .

[10]  Darwin G. Caldwell,et al.  Energy Efficient Fluid Power in Autonomous Legged Robotics , 2009 .

[11]  Petter Krus,et al.  Adaptive Control of a Hydraulic Crane using On-Line Identification , 1993 .

[12]  James E. Bobrow,et al.  Experiments and simulations on the nonlinear control of a hydraulic servosystem , 1999, IEEE Trans. Control. Syst. Technol..

[13]  K. A. Edge,et al.  Adaptive control for a multi-axis hydraulic test rig , 2007 .

[14]  C. Semini,et al.  GAIN SCHEDULING CONTROL FOR THE HYDRAULIC ACTUATION OF THE HYQ ROBOT LEG , 2009 .

[15]  Gordon Cheng,et al.  Simultaneous adaptation to rough terrain and unknown external forces for biped humanoids , 2007, 2007 7th IEEE-RAS International Conference on Humanoid Robots.

[16]  Lionel Morel,et al.  Design and Implementation of Energy Saving Digital Hydraulic Control System , 2007 .

[17]  Donaldson McCloy,et al.  Control of fluid power : analysis and design , 1980 .

[18]  Giovanni Jacazio,et al.  A high performance force control system for dynamic loading of fast moving actuators , 2005 .

[19]  Sang-Ho Hyon,et al.  Dynamics-based control of a one-legged hopping robot , 2003 .

[20]  Yousheng Yang,et al.  HyQ - Hydraulically actuated quadruped robot: Hopping leg prototype , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[21]  Marc H. Raibert,et al.  Legged Robots That Balance , 1986, IEEE Expert.