Controlling the Movement of a TRR Spatial Chain With Coupled Six-Bar Function Generators for Biomimetic Motion

This paper describes a synthesis technique that constrains a spatial serial chain into a single degree-of-freedom mechanism using planar six-bar function generators. The synthesis process begins by specifying the target motion of a serial chain that is parameterized by time. The goal is to create a mechanism with a constant velocity rotary input that will achieve that motion. To do this we solve the inverse kinematics equations to find functions of each serial joint angle with respect to time. Since a constant velocity input is desired, time is proportional to the angle of the input link, and each serial joint angle can be expressed as functions of the input angle. This poses a separate function generator problem to control each joint of the serial chain. Function generators are linkages that coordinate their input and output angles. Each function is synthesized using a technique that finds 11 position Stephenson II linkages, which are then packaged onto the serial chain. Using pulleys and the scaling capabilities of function generating linkages, the final device can be packaged compactly. We describe this synthesis procedure through the design of a biomimetic device for reproducing a flapping wing motion.Copyright © 2015 by ASME

[1]  C. Innocenti.  Polynomial Solution of the Spatial Burmester Problem , 1995 .

[2]  Hai-Jun Su,et al.  The synthesis of an RPS serial chain to reach a given set of task positions , 2005 .

[3]  Pierre M. Larochelle.  Synthesis of Spatial CC Dyads and 4C Mechanisms for Pick & Place Tasks with Guiding Locations , 2012, ARK.

[4]  Antonín Svoboda,et al.  Computing Mechanisms and Linkages , 1965 .

[5]  Constantinos Mavroidis,et al.  A New Polynomial Solution to the Geometric Design Problem of Spatial R-R Robot Manipulators Using the Denavit and Hartenberg Parameters , 2001 .

[6]  Robert J. Wood,et al.  A flapping-wing microrobot with a differential angle-of-attack mechanism , 2013, 2013 IEEE International Conference on Robotics and Automation.

[7]  C. W. McLarnan.  Synthesis of Six-Link Plane Mechanisms by Numerical Analysis , 1963 .

[8]  Tobalske,et al.  Flight kinematics of black-billed magpies and pigeons over a wide range of speeds , 1996, The Journal of experimental biology.

[9]  Sunil K. Agrawal,et al.  Design and Optimization of a Mechanism for Out-of-Plane Insect Winglike Motion With Twist , 2005 .

[10]  G. N. Sandor,et al.  Principles of a General Quaternion-Operator Method of Spatial Kinematic Synthesis , 1968 .

[11]  J. Michael McCarthy,et al.  Computational Design of Stephenson II Six-Bar Function Generators for 11 Accuracy Points , 2016 .

[12]  J. McCarthy,et al.  Kinematic Synthesis of Spatial Serial Chains Using Clifford Algebra Exponentials , 2006 .

[13]  Robert J. Wood,et al.  Monolithic fabrication of millimeter-scale machines , 2012 .

[14]  Lung-Wen Tsai,et al.  Design of Dyads with helical, cylindrical, spherical, revolute and prismatic joints , 1972 .

[15]  C. H. Suh,et al.  Design of Space Mechanisms for Rigid Body Guidance , 1968 .

[16]  Andrew P. Murray,et al.  Burmester Lines of Spatial Five Position Synthesis from the Analysis of a 3-CPC Platform , 1999 .

[17]  Alba Perez-Gracia,et al.  Synthesis of Spatial RPRP Closed Linkages for a Given Screw System , 2011 .

[18]  Gim Song Soh.  Rigid Body Guidance of Human Gait as Constrained TRS Serial Chain , 2014 .

[19]  J. Michael McCarthy,et al.  Design of a 5-SS Spatial Steering Linkage , 2012 .

[20]  M Palmer,et al.  Advanced Engineering Mathematics , 2003 .

[21]  Hai-Jun Su,et al.  SYNTHETICA 2.0: SOFTWARE FOR THE SYNTHESIS OF CONSTRAINED SERIAL CHAINS , 2004 .

[22]  Constantinos Mavroidis,et al.  Geometric Design of 3R Robot Manipulators for Reaching Four End-Effector Spatial Poses , 2004, Int. J. Robotics Res..

[23]  Anoop K. Dhingra,et al.  Synthesis of six-link, slider-crank and four-link mechanisms for function, path and motion generation using homotopy with m-homogenization , 1994 .

[24]  Sunil K. Agrawal,et al.  Design of a Bio-Inspired Spherical Four-Bar Mechanism for Flapping-Wing Micro Air-Vehicle Applications , 2008 .

[25]  Hai-Jun Su,et al.  Geometric Design of Cylindric PRS Serial Chains , 2003, DAC 2003.

[26]  Ea Evert Dijksman.  Motion Geometry of Mechanisms , 1976 .

[27]  J. Michael McCarthy,et al.  On the Seven Position Synthesis of a 5-SS Platform Linkage , 2001 .

[28]  Bernard Roth,et al.  Finite-Position Theory Applied to Mechanism Synthesis , 1967 .

[29]  J. Michael McCarthy,et al.  Dual quaternion synthesis of constrained robotic systems , 2003 .

[30]  Jian S. Dai,et al.  Patterned Bootstrap: A New Method That Gives Efficiency for Some Precision Position Synthesis Problems , 2007 .

[31]  Yimesker Yihun,et al.  Exact Workspace Synthesis for RCCR Linkages , 2014 .

[32]  Jonathan D. Hauenstein,et al.  Numerically Solving Polynomial Systems with Bertini , 2013, Software, environments, tools.

[33]  George N. Sandor.  The synthesis of spatial motion generators with prismatic, revolute and cylindric pairs without branching defectDie synthese räumlicher führungsgetriebe mit dreh-, drehschub- und schubgelenken ohne verzweigungslage , 1988 .

[34]  Robin J. Wootton,et al.  Two basic mechanisms in insect wing folding , 1996, Proceedings of the Royal Society of London. Series B: Biological Sciences.

[35]  K P Dial,et al.  Flight style of the black-billed magpie: variation in wing kinematics, neuromuscular control, and muscle composition. , 1997, The Journal of experimental zoology.

[36]  J. Merlet,et al.  Five Precision Points Synthesis of Spatial RRR Manipulators Using Interval Analysis , 2002 .

[37]  Constantinos Mavroidis,et al.  Solving the Geometric Design Problem of Spatial 3R Robot Manipulators Using Polynomial Homotopy Continuation , 2002 .

[38]  Bernard Roth,et al.  The Kinematics of Motion Through Finitely Separated Positions , 1967 .

[39]  Alba Perez-Gracia,et al.  KINEMATIC SYNTHESIS USING TREE TOPOLOGIES , 2014 .