A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process

[1]  G. E. Mase,et al.  Continuum Mechanics for Engineers , 1991 .

[2]  W. Steen.  Laser Material Processing , 1991 .

[3]  S. B. Brown,et al.  Finite Element Simulation of Welding of Large Structures , 1992 .

[4]  M. Rappaz,et al.  A simple but realistic model for laser cladding , 1994 .

[5]  Alexander Kaplan,et al.  An analytical thermodynamic model of laser welding , 1997 .

[6]  Alexander Nickel,et al.  Analysis of thermal stresses in shape deposition manufacturing of metal parts , 1999 .

[7]  F. Prinz,et al.  Thermal stresses and deposition patterns in layered manufacturing , 2001 .

[8]  Jack Beuth,et al.  A process map for consistent build conditions in the solid freeform fabrication of thin-walled structures , 2001 .

[9]  Radovan Kovacevic,et al.  Improving solid freeform fabrication by laser-based additive manufacturing , 2002 .

[10]  Cristina H. Amon,et al.  Residual stress-induced warping in direct metal solid freeform fabrication , 2002 .

[11]  Rui Vilar,et al.  Microstructural features of consecutive layers of Stellite 6 deposited by laser cladding , 2002 .

[12]  Amir Khajepour,et al.  Three-dimensional finite element modeling of laser cladding by powder injection: Effects of powder feedrate and travel speed on the process , 2003 .

[13]  B. Karlsson,et al.  Mechanical properties of laser cladded steel , 2003 .

[14]  R. Kovacevic,et al.  Modelling and measuring the thermal behaviour of the molten pool in closed-loop controlled laser-based additive manufacturing , 2003 .

[15]  Radovan Kovacevic,et al.  Sensing, modeling and control for laser-based additive manufacturing , 2003 .

[16]  Lin Li,et al.  Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances , 2004 .

[17]  F. Liou,et al.  Modeling of laser cladding with powder injection , 2004 .

[18]  Marek Krawczuk,et al.  Temperature and stress fields induced during laser cladding , 2004 .

[19]  Lin Yang,et al.  Laser direct manufacturing of tungsten nickel collimation component , 2004 .

[20]  J. Dongun Kim,et al.  Nd : YAG laser cladding of marine propeller with hastelloy C-22 , 2004 .

[21]  L. Dubourg,et al.  Laser cladding of MMC coatings on aluminium substrate: influence of composition and microstructure on mechanical properties , 2005 .

[22]  Mohammad Pervez Mughal,et al.  Deformation modelling in layered manufacturing of metallic parts using gas metal arc welding: effect of process parameters , 2005 .

[23]  Frank W. Liou,et al.  Modeling of laser deposition and repair process , 2005 .

[24]  Dajun Chen,et al.  Microstructural characterization of laser cladding of Cu-30Ni , 2005 .

[25]  A. M. Deus,et al.  Rapid tooling by laser powder deposition : Process simulation using finite element analysis , 2005 .

[26]  J. Choi,et al.  Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process , 2005 .

[27]  Jianguo Li,et al.  Interaction between laser beam and powder stream in the process of laser cladding with powder feeding , 2004 .

[28]  Jian Liu,et al.  Three-dimensional analytical model on laser-powder interaction during laser cladding , 2006 .

[29]  J. Myoung,et al.  Effect of thermal misfit stress on crack deflection at planar interfaces in layered systems , 2006 .

[30]  Ashish Kumar Nath,et al.  Laser rapid manufacturing of Colmonoy-6 components , 2006 .

[31]  Jan P. Huissoon,et al.  Three-dimensional numerical approach for geometrical prediction of multilayer laser solid freeform fabrication process , 2007 .