Design of a Model-Free Cross-Coupled Controller with Application to Robotic NOTES
暂无分享,去创建一个
[1] M. Vidyasagar,et al. Nonlinear Systems: Stability Analysis , 1982 .
[2] Hsien-I Lin,et al. A Fast and Unified Method to Find a Minimum-Jerk Robot Joint Trajectory Using Particle Swarm Optimization , 2013, Journal of Intelligent & Robotic Systems.
[3] Aun-Neow Poo,et al. Improving contouring accuracy by using generalized cross-coupled control , 2012 .
[4] Lie Tang,et al. Multiaxis Contour Control—the State of the Art , 2013, IEEE Transactions on Control Systems Technology.
[5] P. R. Ouyang,et al. Position Domain Synchronization Control of Multi-Degrees of Freedom Robotic Manipulator , 2014 .
[6] Zhao Huan,et al. Cross-coupled controller design for triaxial motion systems based on second-order contour error estimation , 2015 .
[7] Xinjun Sheng,et al. Development of a decentralized multi-axis synchronous control approach for real-time networks. , 2017, ISA transactions.
[8] Dmitry Berenson,et al. A robot path planning framework that learns from experience , 2012, 2012 IEEE International Conference on Robotics and Automation.
[9] Carl A. Nelson,et al. Preliminary Validation Testing of a Multifunctional NOTES Robot , 2015 .
[10] Ian R. Manchester,et al. Unifying Robot Trajectory Tracking with Control Contraction Metrics , 2015, ISRR.
[11] Khoi Nguyen,et al. From motion planning to trajectory control with bounded jerk for service manipulator robots , 2010, 2010 IEEE International Conference on Robotics and Automation.
[12] M. F. DeVries,et al. A Microprocessor-Based Control Scheme for the Improvement of Contouring Accuracy , 1983 .
[13] Changyin Sun,et al. Adaptive Neural Network Control of a Flapping Wing Micro Aerial Vehicle With Disturbance Observer , 2017, IEEE Transactions on Cybernetics.
[14] Deshun Liu,et al. Cross-Coupled Contouring Control of Multi-DOF Robotic Manipulator , 2016, Algorithms.
[15] Carl D. Meyer,et al. Matrix Analysis and Applied Linear Algebra , 2000 .
[16] Gang Feng,et al. A Synchronization Approach to Trajectory Tracking of Multiple Mobile Robots While Maintaining Time-Varying Formations , 2009, IEEE Transactions on Robotics.
[17] Ezzat G. Bakhoum,et al. Controller Synthesis of Tracking and Synchronization for Multiaxis Motion System , 2014, IEEE Transactions on Control Systems Technology.
[18] Chao Liu,et al. Precise contour following for biaxial systems via an A-type iterative learning cross-coupled control algorithm , 2015 .
[19] Chin-Sheng Chen,et al. Cross-coupling position command shaping control in a multi-axis motion system , 2011 .
[20] Wei He,et al. Vibration Control of a Flexible Robotic Manipulator in the Presence of Input Deadzone , 2017, IEEE Transactions on Industrial Informatics.
[21] Erfu Yang,et al. Bubble density gradient with laser detection: A wake-homing scheme for supercavitating vehicles , 2018, Advances in Mechanical Engineering.
[22] J. G. Ziegler,et al. Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.
[23] Julius O. Smith,et al. Introduction to Digital Filters: with Audio Applications , 2007 .
[24] Rida T. Farouki,et al. Performance analysis of cross-coupled controllers for CNC machines based upon precise real-time contour error measurement , 2012 .
[25] Jie Liu,et al. An adaptive sliding mode controller for synchronized joint position tracking control of robot manipulators , 2015, 2015 12th International Conference on Informatics in Control, Automation and Robotics (ICINCO).
[26] He Ling,et al. Cross-coupled fuzzy logic sliding mode control of dual-driving feed system , 2018 .
[27] Changyin Sun,et al. Adaptive Neural Impedance Control of a Robotic Manipulator With Input Saturation , 2016, IEEE Transactions on Systems, Man, and Cybernetics: Systems.
[28] Hongliang Ren,et al. A novel tele-operated flexible surgical arm with optimal trajectory tracking aiming for minimally invasive neurosurgery , 2015, 2015 IEEE 7th International Conference on Cybernetics and Intelligent Systems (CIS) and IEEE Conference on Robotics, Automation and Mechatronics (RAM).
[29] John J. Craig,et al. Introduction to Robotics Mechanics and Control , 1986 .
[30] Albert J. Shih,et al. An endoscopic continuum testbed for finalizing system characteristics of a surgical robot for NOTES procedures , 2013, 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.
[31] Zheng Hao,et al. Contour control of direct drive XY table based on fuzzy-logic and position error compensation , 2011, 2011 Chinese Control and Decision Conference (CCDC).
[32] Ezzat G. Bakhoum,et al. Adaptive control of sychronization for multi-axis motion system , 2010, Proceedings of the IEEE SoutheastCon 2010 (SoutheastCon).
[33] Wei He,et al. Adaptive Fuzzy Neural Network Control for a Constrained Robot Using Impedance Learning , 2018, IEEE Transactions on Neural Networks and Learning Systems.
[34] S. J. Phee,et al. Master and slave transluminal endoscopic robot (MASTER) for natural Orifice Transluminal Endoscopic Surgery (NOTES) , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.
[35] Gang Feng,et al. A Model-Free Cross-Coupled Control for Position Synchronization of Multi-Axis Motions: Theory and Experiments , 2007, IEEE Transactions on Control Systems Technology.
[36] Zexiang Li,et al. A Novel Contour Error Estimation for Position Loop-Based Cross-Coupled Control , 2011, IEEE/ASME Transactions on Mechatronics.
[37] D. K. R. Babajee. On the Kung-Traub Conjecture for Iterative Methods for Solving Quadratic Equations , 2016, Algorithms.
[38] Wei He,et al. Adaptive Neural Network Control of an Uncertain Robot With Full-State Constraints , 2016, IEEE Transactions on Cybernetics.
[39] N. A. Wood,et al. Dexterous miniature in vivo robot for NOTES , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.
[40] Shaoping Wang,et al. Robust adaptive motion/force control for motion synchronization of multiple uncertain two-link manipulators , 2013 .
[41] Yoram Koren,et al. Cross-Coupled Biaxial Computer Control for Manufacturing Systems , 1980 .
[42] N. A. Wood,et al. Natural orifice cholecystectomy using a miniature robot , 2009, Surgical Endoscopy.
[43] M. Meng,et al. ROBOTICS IN NATURAL ORIFICE TRANSLUMINAL ENDOSCOPIC SURGERY , 2013 .
[44] Yunjiang Lou,et al. Contouring error computation and cross-coupled control for biaxial servo system , 2016, 2016 12th World Congress on Intelligent Control and Automation (WCICA).
[45] Truong Dam,et al. PID contour tracking control in position domain , 2012, 2012 IEEE International Symposium on Industrial Electronics.
[46] Zhou Wang,et al. Coordinated Motion Strategy for Multi-manipulators System Based on Joint Space Synchronized Cross-Coupled Control , 2015, ICIRA.
[47] Tore Hägglund,et al. The future of PID control , 2000 .