The explicit dynamic model and inertial parameters of the PUMA 560 arm

To provide COSMOS, a dynamic model based manipulator control system, with an improved dynamic model, a PUMA 560 arm was disassembled; the inertial properties of the individual links were measured; and an explicit model incorporating all of the non-zero measured parameters was derived. The explicit model of the PUMA arm has been obtained with a derivation procedure comprised of several heuristic rules for simplification. A simplified model, abbreviated from the full explicit model with a 1% significance criterion, can be evaluated with 805 calculations, one fifth the number required by the recursive Newton-Euler method. The procedure used to derive the model is laid out; the measured inertial parameters are presented, and the model is included in an appendix.

[1]  J. Y. S. Luh,et al.  Resolved-acceleration control of mechanical manipulators , 1980 .

[2]  J. Y. S. Luh,et al.  On-Line Computational Scheme for Mechanical Manipulators , 1980 .

[3]  J. W. Humberston.  Classical mechanics , 1980, Nature.

[4]  John M. Hollerbach,et al.  A Recursive Lagrangian Formulation of Maniputator Dynamics and a Comparative Study of Dynamics Formulation Complexity , 1980, IEEE Transactions on Systems, Man, and Cybernetics.

[5]  David E. Orin,et al.  Efficient Dynamic Computer Simulation of Robotic Mechanisms , 1982 .

[6]  Robert B. McGhee,et al.  A Recursive Free-Body Approach to Computer Simulation of Human Postural Dynamics , 1982 .

[7]  Suboptimal control of industrial manipulators with a weighted minimum time-fuel criterion , 1983, The 22nd IEEE Conference on Decision and Control.

[8]  Richard P. Paul,et al.  The Dynamics of the PUMA Manipulator , 1983, 1983 American Control Conference.

[9]  Richard P. Paul,et al.  The Dynamics of the PUMA Manipulator , 1983, 1983 American Control Conference.

[10]  Robert B. McGhee,et al.  A Recursive Free-Body Approach to Computer Simulation of Human Postural Dynamics , 1982, IEEE Transactions on Biomedical Engineering.

[11]  Oussama Khatib,et al.  Dynamic control of manipulator in operational space , 1983 .

[12]  Miomir Vukobratovic,et al.  A dynamic approach to nominal trajectory synthesis for redundant manipulators , 1984, IEEE Transactions on Systems, Man, and Cybernetics.

[13]  J. Murray,et al.  ARM: An algebraic robot dynamic modeling program , 1984, ICRA.

[14]  J. Murray,et al.  ARM: An algebraic robot dynamic modeling program , 1984, ICRA.

[15]  G. Cesareo,et al.  DYMIR: A code for generating dynamic model of robots , 1984, ICRA.

[16]  G. Cesareo,et al.  DYMIR: A code for generating dynamic model of robots , 1984, ICRA.

[17]  Richard P. Paul,et al.  Computation of the inertial and gravitational coefficients of the dynamics equations for a robot manipulator with a load , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[18]  Richard P. Paul,et al.  Computation of the inertial and gravitational coefficients of the dynamics equations for a robot manipulator with a load , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[19]  Kimon P. Valavanis,et al.  Real-time evaluation of robotic control methods , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[20]  John J. Craig,et al.  Introduction to Robotics Mechanics and Control , 1986 .

[21]  J. Baillieul,et al.  Introduction to ROBOTICS mechanics and control , 1987 .

[22]  Zhi-Hua Zhou,et al.  Transactions on Systems , Man , and Cybernetics – Part B : Cybernetics 2 when , 2022 .