Modeling Soft-Tissue Deformation Prior to Cutting for Surgical Simulation: Finite Element Analysis and Study of Cutting Parameters

This paper presents an experimental study to understand the localized soft-tissue deformation phase immediately preceding crack growth as observed during the cutting of soft tissue. Such understanding serves as a building block to enable realistic haptic display in simulation of soft tissue cutting for surgical training. Experiments were conducted for soft tissue cutting with a scalpel blade while monitoring the cutting forces and blade displacement for various cutting speeds and cutting angles. The measured force-displacement curves in all the experiments of scalpel cutting of pig liver sample having a natural bulge in thickness exhibited a characteristic pattern: repeating units formed by a segment of linear loading (deformation) followed by a segment of sudden unloading (localized crack extension in the tissue). During the deformation phase immediately preceding crack extension in the tissue, the deformation resistance of the soft tissue was characterized with the local effective modulus (LEM). By iteratively solving an inverse problem formulated with the experimental data and finite element models, this measure of effective deformation resistance was determined. Then computational experiments of model order reduction were conducted to seek the most computationally efficient model that still retained fidelity. Starting with a 3-D finite element model of the liver specimen, three levels of model order reduction were carried out with computational effort in the ratio of 1.000:0.103:0.038. We also conducted parametric studies to understand the effect of cutting speed and cutting angle on LEM. Results showed that for a given cutting speed, the deformation resistance decreased as the cutting angle was varied from 90deg to 45deg. For a given cutting angle, the deformation resistance decreased with increase in cutting speed

[1]  A. Atkins,et al.  Elastic and Plastic Fracture: Metals, Polymers, Ceramics, Composites, Biological Materials , 1985 .

[2]  Vincent Hayward,et al.  Measurement, Analysis, and Display of Haptic Signals During Surgical Cutting , 2002, Presence: Teleoperators & Virtual Environments.

[3]  Herve Delingette,et al.  Real-Time Elastic Deformations of Soft Tissues for Surgery Simulation , 1999, IEEE Trans. Vis. Comput. Graph..

[4]  Morten Bro-Nielsen,et al.  Real‐time Volumetric Deformable Models for Surgery Simulation using Finite Elements and Condensation , 1996, Comput. Graph. Forum.

[5]  Koichi Hirota,et al.  Representation of force in cutting operation , 1999, Proceedings IEEE Virtual Reality (Cat. No. 99CB36316).

[6]  Christian Laugier,et al.  Simulating soft tissue cutting using finite element models , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[7]  D. Yamamoto,et al.  A comparison between electrocautery and scalpel plus scissor in breast conserving surgery. , 2003, Oncology Report.

[8]  J. Canny,et al.  Real-time simulation of physically realistic global deformations , 2000 .

[9]  K. Bathe.  Finite Element Procedures , 1995 .

[10]  Kevin Montgomery,et al.  Generalized interactions using virtual tools within the spring framework: cutting. , 2002, Studies in health technology and informatics.

[11]  J. Canny,et al.  Real-time Simulation of Physically Realistic Global Deformation , 1999 .

[12]  Jaydev P. Desai,et al.  A Biomechanical Model of the Liver for Reality-Based Haptic Feedback , 2003, MICCAI.

[13]  I. Sakuma,et al.  Combined compression and elongation experiments and non-linear modelling of liver tissue for surgical simulation , 2004, Medical and Biological Engineering and Computing.

[14]  John F. Canny,et al.  Real-time and physically realistic simulation of global deformation , 1999, SIGGRAPH '99.

[15]  K Miller,et al.  Constitutive modelling of abdominal organs. , 2000, Journal of biomechanics.

[16]  Lynne E. Bilston,et al.  Viscoelastic properties of pig kidney in shear, experimental results and modelling , 2002 .

[17]  Y. Fung.  Elasticity of soft tissues in simple elongation. , 1967, The American journal of physiology.

[18]  H. Saunders.  Book Reviews : NUMERICAL METHODS IN FINITE ELEMENT ANALYSIS K.-J. Bathe and E.L. Wilson Prentice-Hall, Inc, Englewood Cliffs, NJ , 1978 .

[19]  Allison M. Okamura,et al.  On the display of haptic recordings for cutting biological tissues , 2002, Proceedings 10th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. HAPTICS 2002.

[20]  Dinesh K. Pai,et al.  ArtDefo: accurate real time deformable objects , 1999, SIGGRAPH.

[21]  Vincent Hayward,et al.  High-fidelity haptic synthesis of contact with deformable bodies , 2004, IEEE Computer Graphics and Applications.

[22]  P. Stergiopoulos,et al.  A framework for the haptic rendering of the human hand , 2003, 11th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2003. HAPTICS 2003. Proceedings..

[23]  K. Bathe,et al.  On the method of finite spheres in applications: towards the use with ADINA and in a surgical simulator , 2003 .

[24]  J. Desai,et al.  Measuring Forces in Liver Cutting: New Equipment and Experimental Results , 2003, Annals of Biomedical Engineering.

[25]  M A Srinivasan,et al.  A meshless numerical technique for physically based real time medical simulations. , 2001, Studies in health technology and informatics.