A Soft Robotic Gripper Module with 3D Printed Compliant Fingers for Grasping Fruits

This study presents a soft robotic gripper module with 3D printed compliant fingers for grasping fruits. The proposed compliant gripper module is an underactuated two-finger sensor-less design which can be actuated by one linear actuator. A topology optimization method is used to synthesize the monolithic compliant finger. The topology optimized compliant finger is prototyped by 3D printing using flexible thermoplastic filament. The developed gripper module is mounted on a robot arm to pick and place a variety of fruits automatically via machine vision to demonstrate the effectiveness of the design. The results show the developed system can be used for automated grasping of fruits without causing surface damages. The proposed design is expected to be used to resolve the challenging issue for robotic automation of irregular and fragile objects.

[1]  Kyong Sei Lee,et al.  Dynamic Modeling of Damping Effects in Highly Damped Compliant Fingers for Applications Involving Contacts , 2012 .

[2]  Robert D. Howe,et al.  The Highly Adaptive SDM Hand: Design and Performance Evaluation , 2010, Int. J. Robotics Res..

[3]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[4]  Guo Feng Huang,et al.  An Evolutionary Soft-Add Topology Optimization Method for Synthesis of Compliant Mechanisms With Maximum Output Displacement , 2017 .

[5]  Kurt Maute,et al.  Level-set methods for structural topology optimization: a review , 2013 .

[6]  Cristina Alonso,et al.  Topology synthesis of multi-material compliant mechanisms with a Sequential Element Rejection and Admission method , 2014 .

[7]  Ramana V. Grandhi,et al.  A survey of structural and multidisciplinary continuum topology optimization: post 2000 , 2014 .

[8]  Chih-Hsing Liu,et al.  An evolutionary topology optimization method for design of compliant mechanisms with two-dimensional loading , 2015, 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM).

[9]  Kok-Meng Lee,et al.  Explicit dynamic finite element analysis of an automated grasping process using highly damped compliant fingers , 2012, Comput. Math. Appl..

[10]  Chih-Hsing Liu,et al.  Design and prototype of monolithic compliant grippers for adaptive grasping , 2018, 2018 3rd International Conference on Control and Robotics Engineering (ICCRE).

[11]  Chih-Hsing Liu,et al.  Optimal design of a soft robotic gripper with high mechanical advantage for grasping irregular objects , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[12]  Yi Min Xie,et al.  Evolutionary Topology Optimization of Continuum Structures: Methods and Applications , 2010 .

[13]  Just L. Herder,et al.  Design of an Underactuated Finger With a Monolithic Structure and Largely Distributed Compliance , 2010 .

[14]  CianchettiMatteo,et al.  A Bioinspired Soft Robotic Gripper for Adaptable and Effective Grasping , 2015 .

[15]  Guo Feng Huang,et al.  A topology optimization method with constant volume fraction during iterations for design of compliant mechanisms , 2016 .

[16]  Yi Min Xie,et al.  A further review of ESO type methods for topology optimization , 2010 .

[17]  Shahaboddin Shamshirband,et al.  Development of a new type of passively adaptive compliant gripper , 2013, Ind. Robot.

[18]  Oliver Brock,et al.  A novel type of compliant and underactuated robotic hand for dexterous grasping , 2016, Int. J. Robotics Res..

[19]  Shinichi Hirai,et al.  A Prestressed Soft Gripper: Design, Modeling, Fabrication, and Tests for Food Handling , 2017, IEEE Robotics and Automation Letters.

[20]  Kok-Meng Lee,et al.  Explicit finite element analysis of a flexible multibody dynamic system with highly damped compliant fingers , 2010, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[21]  Krishnan Suresh,et al.  Hinge-Free Compliant Mechanism Design Via the Topological Level-Set , 2013 .

[22]  Kok-Meng Lee.  Design criteria for developing an automated live-bird transfer system , 2001, IEEE Trans. Robotics Autom..

[23]  Darwin G. Caldwell,et al.  Robotic manipulation of food products - a review , 2003, Ind. Robot.

[24]  Cristina Alonso,et al.  A Sequential Element Rejection and Admission (SERA) method for compliant mechanisms design , 2013 .

[25]  Clément Gosselin,et al.  Analysis of Underactuated Mechanical Grippers , 2001 .

[26]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[27]  Niels Olhoff,et al.  Topology optimization of continuum structures: A review* , 2001 .

[28]  Chih-Hsing Liu,et al.  Topology Synthesis and Optimal Design of an Adaptive Compliant Gripper to Maximize Output Displacement , 2018, J. Intell. Robotic Syst..

[29]  J. Petersson,et al.  Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima , 1998 .