Mechanics and energetics in tool manufacture and use: a synthetic approach

Tool manufacture and use are observed not only in humans but also in other animals such as mammals, birds and insects. Manufactured tools are used for biomechanical functions such as effective control of fluids and small solid objects and extension of reaching. These tools are passive and used with gravity and the animal users' own energy. From the perspective of evolutionary biology, manufactured tools are extended phenotypes of the genes of the animal and exhibit phenotypic plasticity. This incurs energetic cost of manufacture as compared to the case with a fixed tool. This paper studies mechanics and energetics aspects of tool manufacture and use in non-human beings. Firstly, it investigates possible mechanical mechanisms of the use of passive manufactured tools. Secondly, it formulates the energetic cost of manufacture and analyses when phenotypic plasticity benefits an animal tool maker and user. We take a synthetic approach and use a controlled physical model, i.e. a robot arm. The robot is capable of additively manufacturing scoop and gripper structures from thermoplastic adhesives to pick and place fluid and solid objects, mimicking primates and birds manufacturing tools for a similar function. We evaluate the effectiveness of tool use in pick-and-place and explain the mechanism for gripper tools picking up solid objects with a solid-mechanics model. We propose a way to formulate the energetic cost of tool manufacture that includes modes of addition and reshaping, and use it to analyse the case of scoop tools. Experiment results show that with a single motor trajectory, the robot was able to effectively pick and place water, rice grains, a pebble and a plastic box with a scoop tool or gripper tools that were manufactured by itself. They also show that by changing the dimension of scoop tools, the energetic cost of tool manufacture and use could be reduced. The work should also be interesting for engineers to design adaptive machines.

[1]  Helmut K. Schmidt,et al.  Hot melt adhesives for glass containers by the sol-gel process , 1986 .

[2]  Young-Jun Park,et al.  Hot-melt adhesive properties of EVA/aromatic hydrocarbon resin blend , 2003 .

[3]  G. Ruxton,et al.  Why are pitfall traps so rare in the natural world? , 2009, Evolutionary Ecology.

[4]  G. Hunt.  Manufacture and use of hook-tools by New Caledonian crows , 1996, Nature.

[5]  Fritz Vollrath,et al.  Emergent properties in the behaviour of a virtual spider robot , 1998, Proceedings of the Royal Society of London. Series B: Biological Sciences.

[6]  R. Full,et al.  Tail-assisted pitch control in lizards, robots and dinosaurs , 2012, Nature.

[7]  Jackie Chappell,et al.  Tool selectivity in a non-primate, the New Caledonian crow (Corvus moneduloides) , 2002, Animal Cognition.

[8]  Christian Rutz,et al.  New Caledonian crows attend to multiple functional properties of complex tools , 2013, Philosophical Transactions of the Royal Society B: Biological Sciences.

[9]  Fumiya Iida,et al.  Physical Connection and Disconnection Control Based on Hot Melt Adhesives , 2013, IEEE/ASME Transactions on Mechatronics.

[10]  Barbara Webb,et al.  Robots in invertebrate neuroscience , 2002, Nature.

[11]  Rhys Jones,et al.  RepRap – the replicating rapid prototyper , 2011, Robotica.

[12]  Fumiya Iida,et al.  Robotic body extension based on Hot Melt Adhesives , 2012, 2012 IEEE International Conference on Robotics and Automation.

[13]  Arnaud Hubert,et al.  A micromanipulation cell including a tool changer , 2005 .

[14]  N. Franks.  Animal Architecture Mike Hansell , 2005, Animal Behaviour.

[15]  Mark Yim,et al.  Structure synthesis on-the-fly in a modular robot , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Kasper Stoy,et al.  Self-Reconfigurable Robots: An Introduction , 2010 .

[17]  Alexander Stoytchev,et al.  Behavior-Grounded Representation of Tool Affordances , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[18]  A. Sitompul,et al.  Manufacture and use of tools in wild Sumatran orangutans , 1996, Naturwissenschaften.

[19]  Jordan B. Pollack,et al.  Automatic design and manufacture of robotic lifeforms , 2000, Nature.

[20]  E. Menzel.  Animal Tool Behavior: The Use and Manufacture of Tools by Animals, Benjamin B. Beck. Garland STPM Press, New York and London (1980), 306, Price £24.50 , 1981 .

[21]  Shinya Aoi,et al.  A stability-based mechanism for hysteresis in the walk–trot transition in quadruped locomotion , 2013, Journal of The Royal Society Interface.

[22]  A. Whiten,et al.  A potent effect of observational learning on chimpanzee tool construction , 2009, Proceedings of the Royal Society B: Biological Sciences.

[23]  Chao-Chieh Lan,et al.  An Analytical Contact Model for Design of Compliant Fingers , 2008 .

[24]  Mark van Kleunen,et al.  Constraints on the evolution of adaptive phenotypic plasticity in plants. , 2005, The New phytologist.

[25]  Fumiya Iida,et al.  A dragline-forming mobile robot inspired by spiders , 2014, Bioinspiration & biomimetics.

[26]  Fumio Hara,et al.  Morpho-functional Machines: The New Species , 2012, Springer Japan.

[27]  D. Wilson,et al.  Costs and limits of phenotypic plasticity. , 1998, Trends in ecology & evolution.

[28]  Jan Wrege,et al.  Micro bonding with non-viscous adhesives , 2006 .

[29]  Massimo Pigliucci,et al.  Phenotypic Plasticity: Beyond Nature and Nurture , 2001 .

[30]  V. Bentley-Condit,et al.  Animal tool use: current definitions and an updated comprehensive catalog , 2010 .

[31]  Nicola S. Clayton,et al.  The Mentality of Crows: Convergent Evolution of Intelligence in Corvids and Apes , 2004, Science.

[32]  Yufei Wang,et al.  Automatic generation and fabrication of designs , 2002 .

[33]  Fumiya Iida,et al.  Large-Payload Climbing in Complex Vertical Environments Using Thermoplastic Adhesive Bonds , 2013, IEEE Transactions on Robotics.

[34]  Michael H Dickinson,et al.  The influence of sensory delay on the yaw dynamics of a flapping insect , 2012, Journal of The Royal Society Interface.

[35]  G R Hunt,et al.  Human–like, population–level specialization in the manufacture of pandanus tools by New Caledonian crows Corvus moneduloides , 2000, Proceedings of the Royal Society of London. Series B: Biological Sciences.

[36]  Laziz Bouzidi,et al.  Current Research and Development Status and Prospect of Hot-Melt Adhesives: A Review , 2008 .

[37]  Christos Kassapoglou,et al.  Recurring Cost Minimization of Composite Laminated Structures – Optimum Part Size as a Function of Learning Curve Effects and Assembly , 2002 .

[38]  A. Ijspeert,et al.  From Swimming to Walking with a Salamander Robot Driven by a Spinal Cord Model , 2007, Science.

[39]  Josh Bongard,et al.  Morphological change in machines accelerates the evolution of robust behavior , 2011, Proceedings of the National Academy of Sciences.

[40]  Jackie Chappell,et al.  Selection of tool diameter by New Caledonian crows Corvus moneduloides , 2004, Animal Cognition.

[41]  Nathan J Emery,et al.  Insightful problem solving and creative tool modification by captive nontool-using rooks , 2009, Proceedings of the National Academy of Sciences.

[42]  Kenzo Nonami,et al.  A pick-and-place hand mechanism without any actuators and sensors , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[43]  P. Umbanhowar,et al.  Mechanical models of sandfish locomotion reveal principles of high performance subsurface sand-swimming , 2011, Journal of The Royal Society Interface.

[44]  R. Pfeifer,et al.  Self-Organization, Embodiment, and Biologically Inspired Robotics , 2007, Science.

[45]  Yasuo Kuniyoshi,et al.  Adaptive body schema for robotic tool-use , 2006, Adv. Robotics.

[46]  A. Agrawal,et al.  Re-evaluating the costs and limits of adaptive phenotypic plasticity , 2010, Proceedings of the Royal Society B: Biological Sciences.

[47]  Gregory S. Chirikjian,et al.  Towards cyclic fabrication systems for modular robotics and rapid manufacturing , 2009, Robotics: Science and Systems.

[48]  Jan Helge Bøhn,et al.  Adaptive slicing using stepwise uniform refinement , 1996 .

[49]  M. A. MacIver,et al.  Aquatic manoeuvering with counter-propagating waves: a novel locomotive strategy , 2011, Journal of The Royal Society Interface.

[50]  R. Dawkins.  The Extended Phenotype , 1982 .

[51]  Annika Raatz,et al.  Sensor-guided micro assembly of active micro systems by using a hot melt based joining technology , 2008 .

[52]  D. Owaki,et al.  Simple robot suggests physical interlimb communication is essential for quadruped walking , 2013, Journal of The Royal Society Interface.

[53]  Timothy G. Gutowski,et al.  Development of a theoretical cost model for advanced composite fabrication , 1994 .

[54]  Chen Li,et al.  A Terradynamics of Legged Locomotion on Granular Media , 2013, Science.

[55]  Shuji Hashimoto,et al.  Passive Self-Replication of Millimeter-Scale Parts , 2009, IEEE Transactions on Automation Science and Engineering.

[56]  B. Beck.  Animal Tool Behavior: The Use and Manufacture of Tools by Animals , 1980 .