A general mechanical model for tendon-driven continuum manipulators

Recently, continuum manipulators have drawn a lot of interest and effort from the robotic community, nevertheless control and modeling of such manipulators are still a challenging task especially because they require a continuum approach. In this paper, a general mechanical model with a geometrically exact approach for tendon-driven continuum manipulators is presented. This model can be applied to a wide range of manipulators thanks to the generality of the parameters which can be set. The approach proposed could as well be a powerful tool for developing the control strategy. The model is also capable of properly simulating the coupled tendon drive, because it takes into account the torsion of the robot arm rather than neglecting it, as it is common practice in other existing models.

[1]  Ian D. Walker,et al.  Soft robotics: Biological inspiration, state of the art, and future research , 2008 .

[2]  Ian D. Walker,et al.  Kinematics and the Implementation of an Elephant's Trunk Manipulator and Other Continuum Style Robots , 2003, J. Field Robotics.

[3]  Darwin G. Caldwell,et al.  A 3D dynamic model for continuum robots inspired by an octopus arm , 2011, 2011 IEEE International Conference on Robotics and Automation.

[4]  Bryan A. Jones,et al.  Three dimensional statics for continuum robotics , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Adam Morecki,et al.  Elephant trunk type elastic manipulator - a tool for bulk and liquid materials transportation , 1999, Robotica.

[6]  B Mazzolai,et al.  Design of a biomimetic robotic octopus arm , 2009, Bioinspiration & biomimetics.

[7]  John Kenneth Salisbury,et al.  Configuration Tracking for Continuum Manipulators With Coupled Tendon Drive , 2009, IEEE Transactions on Robotics.

[8]  Matteo Cianchetti,et al.  Planar steady-state physical model for a soft cable-driven octopus-like arm manipulator , 2011 .

[9]  Ian D. Walker,et al.  New dynamic models for planar extensible continuum robot manipulators , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  John Kenneth Salisbury,et al.  Mechanics Modeling of Tendon-Driven Continuum Manipulators , 2008, IEEE Transactions on Robotics.

[11]  Christopher D. Rahn,et al.  Geometrically Exact Models for Soft Robotic Manipulators , 2008, IEEE Transactions on Robotics.

[12]  Frédéric Boyer,et al.  Macro-continuous computed torque algorithm for a three-dimensional eel-like robot , 2006, IEEE Transactions on Robotics.

[13]  Gregory S. Chirikjian,et al.  Kinematically optimal hyper-redundant manipulator configurations , 1995, IEEE Trans. Robotics Autom..

[14]  Robert J. Webster,et al.  Design and Kinematic Modeling of Constant Curvature Continuum Robots: A Review , 2010, Int. J. Robotics Res..

[15]  M Giorelli,et al.  A 3D steady-state model of a tendon-driven continuum soft manipulator inspired by the octopus arm , 2012, Bioinspiration & biomimetics.