A Passivity-based Concurrent Whole-Body Control (cWBC) of Persistently Interacting Human-Exoskeleton Systems

This paper presents a concurrent whole-body control (cWBC) for human-exoskeleton systems that are tightly coupled at a Cartesian level (e.g., feet, hands, torso). The exoskeleton generates joint torques that i) cancel the effects of gravity on the coupled system, ii) perform a primary task (e.g., maintaining the balance of the system), and iii) exploit the kinematic redundancy of the system to amplify the forces exerted by the human operator. The coupled dynamic system is demonstrated to be passive, as its overall energy always goes dissipated until a minimum is reached. The proposed method is designed specifically to control exoskeletons for power augmentation worn by healthy operators in applications such as manufacturing, as it allows to increase the worker's capabilities, therefore reducing the risk of injuries.

[1]  Jerry E. Pratt,et al.  Development of the IHMC Mobility Assist Exoskeleton , 2009, 2009 IEEE International Conference on Robotics and Automation.

[2]  Robert Platt,et al.  Multiple-priority impedance control , 2011, 2011 IEEE International Conference on Robotics and Automation.

[3]  Oussama Khatib,et al.  Synthesis of Whole-Body Behaviors through Hierarchical Control of Behavioral Primitives , 2005, Int. J. Humanoid Robotics.

[4]  Nikos G. Tsagarakis,et al.  An attractor-based Whole-Body Motion Control (WBMC) system for humanoid robots , 2013, 2013 13th IEEE-RAS International Conference on Humanoid Robots (Humanoids).

[5]  Jun Morimoto,et al.  XoR: Hybrid drive exoskeleton robot that can balance , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  Marc Toussaint,et al.  Whole-body Motion Planning – Building Blocks for Intelligent Systems , 2010 .

[7]  Yasushi Ikeuchi,et al.  Walking assist device with bodyweight support system , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Federico L. Moro Use of gravitational stiffness in an attractor-based Whole-Body Motion Control approach , 2015, 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids).

[9]  H. Kazerooni,et al.  Biomechanical design of the Berkeley lower extremity exoskeleton (BLEEX) , 2006, IEEE/ASME Transactions on Mechatronics.

[10]  H. van der Kooij,et al.  Design of a series elastic- and Bowden cable-based actuation system for use as torque-actuator in exoskeleton-type training , 2005, 9th International Conference on Rehabilitation Robotics, 2005. ICORR 2005..

[11]  Francesco Braghin,et al.  Impedance shaping controller for robotic applications in interaction with compliant environments , 2014, 2014 11th International Conference on Informatics in Control, Automation and Robotics (ICINCO).

[12]  Conor James Walsh,et al.  Development of a lightweight, underactuated exoskeleton for load-carrying augmentation , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[13]  Luis Sentis,et al.  Whole-Body Control of Humanoid Robots , 2018, Humanoid Robotics: A Reference.

[14]  Yoshiyuki Sankai,et al.  HAL: Hybrid Assistive Limb Based on Cybernics , 2007, ISRR.

[15]  Federico L. Moro Balancing While Executing Competing Reaching Tasks: An Attractor-Based Whole-Body Motion Control System Using Gravitational Stiffness , 2016, Int. J. Humanoid Robotics.