Cable-driven parallel manipulators with base mobility: A planar case study

[1]  Jean-Pierre Merlet.  Redundant parallel manipulators , 1996 .

[2]  J. Angeles,et al.  The Kinetostatic Optimization of Robotic Manipulators: The Inverse and the Direct Problems , 2006 .

[3]  Venkat Krovi,et al.  ROBOTIC PHYSICAL EXERCISE AND SYSTEM (ROPES): A CABLE-DRIVEN ROBOTIC REHABILITATION SYSTEM FOR LOWER-EXTREMITY MOTOR THERAPY , 2015 .

[4]  Saeed Behzadipour,et al.  Design and Testing of an ultra-High-Speed cable robot , 2006, Int. J. Robotics Autom..

[5]  Jean-Pierre Merlet,et al.  A portable, modular parallel wire crane for rescue operations , 2010, 2010 IEEE International Conference on Robotics and Automation.

[6]  Sadao Kawamura,et al.  Realization of a virtual sports training system with parallel wire mechanism , 1997, Proceedings of International Conference on Robotics and Automation.

[7]  Qi Lu,et al.  Singularity Analysis of Planar Cable-Driven Parallel Robots , 2008, 2008 IEEE Conference on Robotics, Automation and Mechatronics.

[8]  Jorge Angeles,et al.  On the elastostatic analysis of mechanical systems , 2012 .

[9]  Jean-Pierre Merlet,et al.  On the redundancy of cable-driven parallel robots , 2015 .

[10]  Elena R. Messina,et al.  Design and workspace analysis of a 6–6 cable-suspended parallel robot , 2004 .

[11]  Manfred Hiller,et al.  Estimating the Controllable Workspace of Tendon-Based Stewart Platforms , 2000 .

[12]  Sunil K. Agrawal,et al.  On the Design of Cable-Suspended Planar Parallel Robots , 2005 .

[13]  Imin Kao,et al.  Conservative Congruence Transformation for Joint and Cartesian Stiffness Matrices of Robotic Hands and Fingers , 2000, Int. J. Robotics Res..

[14]  James S. Albus,et al.  The NIST robocrane , 1993, J. Field Robotics.

[15]  Guanglei Wu,et al.  Stiffness Analysis and Optimization of a Co-axial Spherical Parallel Manipulator , 2014 .

[16]  Xiaobo Zhou,et al.  Cooperating Mobile Cable Robots: Screw Theoretic Analysis , 2013 .

[17]  Abbas Fattah,et al.  Kinematics and Dynamics Modeling of a New 4-DOF Cable-Driven Parallel Manipulator , 2011, Int. J. Intell. Mechatronics Robotics.

[18]  Jonathan Fink,et al.  Cooperative Towing With Multiple Robots , 2008 .

[19]  R. Nan,et al.  Five-hundred-meter Aperture Spherical Telescope project , 2001 .

[20]  Peter I. Corke,et al.  Air Vehicle Simulator: an Application for a Cable Array Robot , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[21]  G. Oriolo,et al.  Robotics: Modelling, Planning and Control , 2008 .

[22]  Clément Gosselin,et al.  Analysis of the wrench-closure workspace of planar parallel cable-driven mechanisms , 2006, IEEE Transactions on Robotics.

[23]  Guilin Yang,et al.  Workspace analysis of fully restrained cable-driven manipulators , 2009, Robotics Auton. Syst..

[24]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[25]  Hamid D. Taghirad,et al.  Geometrical workspace analysis of a cable-driven redundant parallel manipulator: KNTU CDRPM , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[26]  Xiaobo Zhou,et al.  Wrench Reconfigurability via Attachment Point Design in Mobile Cable Robots , 2013 .

[27]  Manfred Hiller,et al.  On design of a redundant wire-driven parallel robot WARP manipulator , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[28]  Gaurav S. Sukhatme,et al.  Design and Implementation of NIMS3D, a 3-D Cabled Robot for Actuated Sensing Applications , 2009, IEEE Transactions on Robotics.

[29]  Kun Yu,et al.  Enhanced trajectory tracking control with active lower bounded stiffness control for cable robot , 2010, 2010 IEEE International Conference on Robotics and Automation.

[30]  Sunil K. Agrawal,et al.  Design and Optimization of a Cable Driven Upper Arm Exoskeleton , 2009 .

[31]  Guilin Yang,et al.  Kinematics and singularity analysis of a planar cable-driven parallel manipulator , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[32]  Zhiwei Luo,et al.  On the stiffness and stiffness control of redundant manipulators , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[33]  Septimiu E. Salcudean,et al.  Matrix normalization for optimal robot design , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[34]  Clément Gosselin,et al.  Cable-Driven Parallel Mechanisms: Application to a Locomotion Interface , 2007 .

[35]  Gaurav S. Sukhatme,et al.  Rapid Computation of Optimally Safe Tension Distributions for Parallel Cable-Driven Robots , 2009, IEEE Transactions on Robotics.

[36]  Robert L. Williams,et al.  Vehicle Simulation System: Controls and Virtual-reality-based Dynamics Simulation , 2008, J. Intell. Robotic Syst..

[37]  Lung-Wen Tsai,et al.  Robot Analysis and Design: The Mechanics of Serial and Parallel Manipulators , 1999 .

[38]  Keiko Homma,et al.  A wire-driven leg rehabilitation system: development of a 4-DOF experimental system , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[39]  Robert L. Williams.  CABLE-SUSPENDED HAPTIC INTERFACE , 1998 .

[40]  Xiaobo Zhou.  Towards cooperative manipulation using cable robots , 2015 .

[41]  Lixun Zhang,et al.  Hybrid Force Control Based on ICMAC for an Astronaut Rehabilitative Training Robot , 2012 .

[42]  Saeed Ebrahimi,et al.  Parameter Analysis and Normalization for the Dynamics and Design of Multibody Systems , 2009 .

[43]  Jean-Pierre Merlet,et al.  Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms , 2006, ARK.

[44]  Paolo Gallina,et al.  Translational Planar Cable-Direct-Driven Robots , 2003, J. Intell. Robotic Syst..

[45]  Xiaobo Zhou,et al.  Stiffness modulation exploiting configuration redundancy in mobile cable robots , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[46]  Yoshihiko Nakamura,et al.  Advanced robotics - redundancy and optimization , 1990 .

[47]  Masaru Uchiyama,et al.  On the stiffness and stability of Gough-Stewart platforms , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[48]  Jun Wu,et al.  A comparison study on the dynamics of planar 3-DOF 4-RRR, 3-RRR and 2-RRR parallel manipulators , 2011 .

[49]  M. Hiller,et al.  Tension Distribution in Tendon-Based Stewart Platforms , 2002 .

[50]  Andreas Müller,et al.  Redundant Actuation of Parallel Manipulators , 2008 .

[51]  J. Angeles,et al.  The stiffness matrix in elastically articulated rigid-body systems , 2007 .

[52]  C. Gosselin,et al.  On the determination of the force distribution in overconstrained cable-driven parallel mechanisms , 2011 .

[53]  Oussama Khatib,et al.  Springer Handbook of Robotics , 2007, Springer Handbooks.

[54]  Sadao Kawamura,et al.  Development of a virtual sports machine using a wire drive system-a trial of virtual tennis , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[55]  Jorge Angeles,et al.  Fundamentals of Robotic Mechanical Systems: Theory, Methods, and Algorithms , 1995 .

[56]  Amir Khajepour,et al.  Analysis of a High Stiffness Warehousing Cable-Based Robot , 2014 .

[57]  Jorge Angeles,et al.  Architecture singularities of platform manipulators , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[58]  Hamid D. Taghirad,et al.  Parallel Robots: Mechanics and Control , 2013 .

[59]  Vijay Kumar,et al.  Determination and Stability Analysis of Equilibrium Configurations of Objects Suspended From Multiple Aerial Robots , 2012 .

[60]  Robert L. Williams,et al.  Cable-Suspended Vehicle Simulation System Concept , 2007 .

[61]  Sadao Kawamura,et al.  Development of an Ultrahigh Speed Robot FALCON Using Parallel Wire Drive Systems , 1997 .

[62]  Amir Moradi,et al.  Stiffness Analysis of Cable-Driven Parallel Robots , 2013 .

[63]  Guilin Yang,et al.  A generic force-closure analysis algorithm for cable-driven parallel manipulators , 2011 .

[64]  Paolo Gallina,et al.  Planar Cable-Direct-Driven Robots, Part I: Kinematics and Statics , 2001 .

[65]  Manfred Hiller,et al.  Workspace, Stiffness, Singularities and Classification of Tendon-Driven Stewart Platforms , 1998 .

[66]  Toshiro Higuchi,et al.  Application of Multi-Dimensional Wire Cranes in Construction , 1988 .

[67]  Robert L. Williams,et al.  Cable-suspended robotic contour crafting system , 2007 .

[68]  J. Salisbury,et al.  Active stiffness control of a manipulator in cartesian coordinates , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[69]  Clément Gosselin,et al.  Stiffness mapping for parallel manipulators , 1990, IEEE Trans. Robotics Autom..

[70]  J. R. Jones,et al.  Null–space construction using cofactors from a screw–algebra context , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[71]  Andreas Pott,et al.  An Improved Force Distribution Algorithm for Over-Constrained Cable-Driven Parallel Robots , 2014 .

[72]  Paolo Gallina,et al.  Planar Translational Cable-Direct-Driven Robots , 2003, J. Field Robotics.

[73]  Kun Yu,et al.  Simultaneous Trajectory Tracking and Stiffness Control of Cable Actuated Parallel Manipulator , 2009 .

[74]  ARACHNIS: Analysis of Robots Actuated by Cables with Handy and Neat Interface Software , 2015 .

[75]  Imme Ebert-Uphoff,et al.  Wrench-feasible workspace generation for cable-driven robots , 2006, IEEE Transactions on Robotics.

[76]  Saeed Behzadipour,et al.  Stiffness of Cable-based Parallel Manipulators With Application to Stability Analysis , 2006 .

[77]  Xuechao Duan,et al.  Workspace Classification and Quantification Calculations of Cable-Driven Parallel Robots , 2014 .

[78]  A. Ming,et al.  Study on multiple degree-of-freedom positioning mechanism using wires. I: Concept, design and control , 1994 .

[79]  Venkat Krovi,et al.  Parallel Articulated-Cable Exercise Robot (PACER): Novel Home-Based Cable-Driven Parallel Platform Robot for Upper Limb Neuro-Rehabilitation , 2015 .

[80]  Xiaobo Zhou,et al.  Analysis framework for cooperating mobile cable robots , 2012, 2012 IEEE International Conference on Robotics and Automation.

[81]  Richard Verhoeven,et al.  Analysis of the Workspace of Tendon-based Stewart Platforms , 2004 .

[82]  Marc Gouttefarde,et al.  Stiffness Matrix of 6-DOF Cable-Driven Parallel Robots and Its Homogenization , 2014 .

[83]  Jean-Pierre Merlet,et al.  Geometrico-Static Analysis of Under-Constrained Cable-Driven Parallel Robots , 2010 .

[84]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[85]  Per Henrik Borgstrom.  Novel cable-driven robotic platforms and algorithms for environmental sensing applications , 2009 .