Recognition of contact conditions by robots using tools

This paper deals with identification of the contact conditions of a robot during tool use. This paper proposes a method for the identification of the contact conditions considering slide between the tool and the work object. The validity of the method is shown through simulation and experimental results.

[1]  Kimitoshi Yamazaki,et al.  Cooking Behavior with Handling General Cooking Tools based on a System Integration for a Life-sized Humanoid Robot , 2013, Paladyn J. Behav. Robotics.

[2]  Toshiyuki Murakami,et al.  A sensorless bilateral robot manipulator based on twin drive system , 2001 .

[3]  Matthew T. Mason,et al.  Robot Hands and the Mechanics of Manipulation , 1985 .

[4]  Toshiyuki Murakami,et al.  Torque sensorless control in multidegree-of-freedom manipulator , 1993, IEEE Trans. Ind. Electron..

[5]  Takayoshi Yamada,et al.  Identification of contact conditions from contaminated data of contact force and moment , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[6]  Toshiaki Tsuji,et al.  Whole-Body Force Sensation by Force Sensor With Shell-Shaped End-Effector , 2009, IEEE Transactions on Industrial Electronics.

[7]  Alexander Stoytchev,et al.  Behavior-Grounded Representation of Tool Affordances , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[8]  Takayoshi Yamada,et al.  Identification of Contact Conditions by Active Force Sensing - Estimated Parameter Uncertainty and Experimental Verification - , 2011, J. Robotics Mechatronics.

[9]  Toshiaki Tsuji,et al.  Contact state recognition based on haptic signal processing for robotic tool use , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[10]  Yasuyuki Funahashi,et al.  Parameter identification of contact conditions by active force sensing , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[11]  S. Sakaino,et al.  Classification of a hybrid control system for robotic tool use , 2013, 2013 IEEE International Conference on Mechatronics (ICM).

[12]  Aiguo Ming,et al.  Grasping force control of multi-fingered robot hand based on slip detection using tactile sensor , 2007, 2008 IEEE International Conference on Robotics and Automation.

[13]  Tetsuya Ogata,et al.  Modeling tool-body assimilation using second-order Recurrent Neural Network , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.