Kinematic synthesis and testing of a new portable hand exoskeleton

In this research activity, a new methodology for the synthesis of hand exoskeleton mechanisms has been developed and validated through real prototypes. The innovative methodology is based on a new parallel mechanism and has been tested by building a robotic assistive device for hand opening disabilities applied to real cases. The studied robotic orthosis is designed to be a low-cost, adaptable and portable hand exoskeletons to assist people with hand opening disabilities in their activities of daily livings. As regards the methodology for the synthesis of hand exoskeleton mechanism, the authors propose to use a motion capture system to acquire the real hand phalanx trajectories and the geometrical characteristics of the patient’s hand, and to use optimization algorithms to properly defines the novel kinematic mechanism that better fits the finger trajectories. The preliminary testing phase of the prototype on a single patient is concluded; currently, through the collaboration with an Italian rehabilitation center, a group of patients are testing the proposed HES methodology.

[1]  Jorge Nocedal,et al.  A trust region method based on interior point techniques for nonlinear programming , 2000, Math. Program..

[2]  Tomomasa Sato,et al.  A Prototype of Index-Finger PIP Joint Motion Amplifier for Assisting Patients with Impaired Hand Mobility , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[3]  Robert J. Wood,et al.  Soft robotic glove for combined assistance and at-home rehabilitation , 2015, Robotics Auton. Syst..

[4]  Yoky Matsuoka,et al.  Comparison of control strategies for an EMG controlled orthotic exoskeleton for the hand , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[5]  Derek G. Kamper,et al.  Design and Development of the Cable Actuated Finger Exoskeleton for Hand Rehabilitation Following Stroke , 2014, IEEE/ASME Transactions on Mechatronics.

[6]  Hyoukryeol Choi,et al.  SKK Hand Master-hand exoskeleton driven by ultrasonic motors , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[7]  K. Kondak,et al.  Mechanical design and motion control of a hand exoskeleton for rehabilitation , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[8]  Stephen J. Wright,et al.  Numerical Optimization , 2018, Fundamental Statistical Inference.

[9]  Francesco Giovacchini,et al.  Mechatronic Design and Characterization of the Index Finger Module of a Hand Exoskeleton for Post-Stroke Rehabilitation , 2012, IEEE/ASME Transactions on Mechatronics.

[10]  Massimo Bergamasco,et al.  Haptic Hand Exoskeleton for Precision Grasp Simulation , 2013 .

[11]  Rahsaan J. Holley,et al.  Hand Spring Operated Movement Enhancer (HandSOME): A Portable, Passive Hand Exoskeleton for Stroke Rehabilitation , 2011, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[12]  F.C.T. van der Helm,et al.  Kinematic Design to Improve Ergonomics in Human Machine Interaction , 2006, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[13]  L. Mertz,et al.  The Next Generation of Exoskeletons: Lighter, Cheaper Devices Are in the Works , 2012, IEEE Pulse.

[14]  Massimo Bergamasco,et al.  Mechanical design of a novel Hand Exoskeleton for accurate force displaying , 2009, 2009 IEEE International Conference on Robotics and Automation.

[15]  R. Vaidyanathan,et al.  Development of a parametric kinematic model of the human hand and a novel robotic exoskeleton , 2011, 2011 IEEE International Conference on Rehabilitation Robotics.

[16]  Darwin G. Caldwell,et al.  Human hand compatible underactuated exoskeleton robotic system , 2014 .

[17]  Frans C. T. van der Helm,et al.  Self-Aligning Exoskeleton Axes Through Decoupling of Joint Rotations and Translations , 2009, IEEE Transactions on Robotics.

[18]  Soo-Jin Lee,et al.  Current hand exoskeleton technologies for rehabilitation and assistive engineering , 2012 .

[19]  Mario Cortese,et al.  Kinematics and design of a portable and wearable exoskeleton for hand rehabilitation , 2013, 2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR).

[20]  Oussama Khatib,et al.  Springer Handbook of Robotics , 2007, Springer Handbooks.

[21]  Homayoon Kazerooni,et al.  Exoskeletons for human power augmentation , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[22]  Nikolaos G. Tsagarakis,et al.  A human hand compatible optimised exoskeleton system , 2010, 2010 IEEE International Conference on Robotics and Biomimetics.

[23]  William S. Harwin,et al.  Challenges and Opportunities for Robot-Mediated Neurorehabilitation , 2006, Proceedings of the IEEE.

[24]  Naila Rahman,et al.  Design, development and deployment of a hand/wrist exoskeleton for home-based rehabilitation after stroke - SCRIPT project , 2014, Robotica.

[25]  Tadej Bajd,et al.  Assessing joint angles in human hand via optical tracking device and calibrating instrumented glove , 2007 .

[26]  Marco Cempini,et al.  Self-Alignment Mechanisms for Assistive Wearable Robots: A Kinetostatic Compatibility Method , 2013, IEEE Transactions on Robotics.

[27]  David J. Reinkensmeyer,et al.  Single Degree-of-Freedom Exoskeleton Mechanism Design for Thumb Rehabilitation , 2012, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[28]  Derek G. Kamper,et al.  An Actuated Finger Exoskeleton for Hand Rehabilitation Following Stroke , 2007 .

[29]  Robert Leeb,et al.  On the road to a neuroprosthetic hand: A novel hand grasp orthosis based on functional electrical stimulation , 2010, 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology.

[30]  J. Blake,et al.  Haptic Glove With MR Brakes for Virtual Reality , 2009, IEEE/ASME Transactions on Mechatronics.

[31]  Yasuhisa Hasegawa,et al.  Five-fingered assistive hand with mechanical compliance of human finger , 2008, 2008 IEEE International Conference on Robotics and Automation.

[32]  Lapo Governi,et al.  Development and Testing of a Low Cost Wearable and Portable Hand Exoskeleton Based on a Parallel Mechanism , 2015 .

[33]  Yoky Matsuoka,et al.  An EMG-Controlled Hand Exoskeleton for Natural Pinching , 2004, J. Robotics Mechatronics.