Modelling and identification

From a mechanical viewpoint, a robotic system is in general constituted by a locomotion apparatus (legs, wheels) to move in the environment and by a manipulation apparatus to operate on the objects present in the environment. It is then important to distinguish between the class of mobile robots and the class of robot manipulators.

[1]  T. Michael Knasel,et al.  Robotic manipulator control , 1991, Robotics Auton. Syst..

[2]  J. Angeles.  Spatial Kinematic Chains: Analysis ― Synthesis ― Optimization , 1982 .

[3]  Christopher G. Atkeson,et al.  Estimation of Inertial Parameters of Manipulator Loads and Links , 1986 .

[4]  Wisama Khalil,et al.  A new geometric notation for open and closed-loop robots , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[5]  Takeo Kanade,et al.  Parameter identification of robot dynamics , 1985, 1985 24th IEEE Conference on Decision and Control.

[6]  Wisama Khalil,et al.  Calibration of the geometric parameters of robots without external sensors , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[7]  Henry W. Stone,et al.  Kinematic Modeling, Identification, and Control of Robotic Manipulators , 1987 .

[8]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[9]  Wisama Khalil,et al.  A direct determination of minimum inertial parameters of robots , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[10]  Maxime Gautier,et al.  Automatic Dynamic Modelling of Robots Including Parameters of Links and Actuators , 1986 .

[11]  Brian Armstrong,et al.  Friction: experimental determination, modeling and compensation , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[12]  John M. Hollerbach,et al.  A survey of kinematic calibration , 1989 .

[13]  Wisama Khalil,et al.  Minimum operations and minimum parameters of the dynamic models of tree structure robots , 1987, IEEE Journal on Robotics and Automation.

[14]  Fouad Bennis,et al.  Automatic generation of the inverse geometric model of robots , 1991, Robotics Auton. Syst..

[15]  Wisama Khalil,et al.  A system for generating the symbolic models of robots , 1994 .

[16]  Fouad Bennis,et al.  Symbolic Calculation of the Base Inertial Parameters of Closed-Loop Robots , 1995, Int. J. Robotics Res..

[17]  Yuan F. Zheng,et al.  Computation of input generalized forces for robots with closed kinematic chain mechanisms , 1985, IEEE J. Robotics Autom..

[18]  John J. Craig,et al.  Introduction to Robotics Mechanics and Control , 1986 .

[19]  John M. Hollerbach,et al.  Self-calibration of single-loop, closed kinematic chains formed by dual or redundant manipulators , 1988, Proceedings of the 27th IEEE Conference on Decision and Control.

[20]  A. Morgan,et al.  Solving the Kinematics of the Most General Six- and Five-Degree-of-Freedom Manipulators by Continuation Methods , 1985 .

[21]  David E. Orin,et al.  Kinematic and kinetic analysis of open-chain linkages utilizing Newton-Euler methods , 1979 .

[22]  Oussama Khatib,et al.  A unified approach for motion and force control of robot manipulators: The operational space formulation , 1987, IEEE J. Robotics Autom..

[23]  Brian Armstrong.  On finding 'exciting' trajectories for identification experiments involving systems with non-linear dynamics , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[24]  Oussama Khatib,et al.  The robotics review 1 , 1989 .

[25]  Chia-Hsiang Menq,et al.  Experimental study of observability of parameter errors in robot calibration , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[26]  W. Khalil,et al.  The use of the generalized links to determine the minimum inertial parameters of robots , 1990, J. Field Robotics.

[27]  Brian Armstrong-Hélouvry,et al.  Control of machines with friction , 1991, The Kluwer international series in engineering and computer science.

[28]  W. W. Schrader,et al.  Efficient Computation of the Jacobian for Robot Manipulators , 1984 .

[29]  Daniel E. Whitney,et al.  Resolved Motion Rate Control of Manipulators and Human Prostheses , 1969 .

[30]  Charles L. Lawson,et al.  Solving least squares problems , 1976, Classics in applied mathematics.

[31]  Roy Featherstone,et al.  Robot Dynamics Algorithms , 1987 .

[32]  Carlos Canudas de Wit,et al.  Adaptive Friction Compensation in Robot Manipulators: Low Velocities , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[33]  B. Roth,et al.  Inverse Kinematics of the General 6R Manipulator and Related Linkages , 1993 .

[34]  Fouad Bennis,et al.  Comments on "Direct calculation of minimum set of inertial parameters of serial robots" , 1994, IEEE Trans. Robotics Autom..

[35]  John M. Hollerbach,et al.  A Recursive Lagrangian Formulation of Maniputator Dynamics and a Comparative Study of Dynamics Formulation Complexity , 1980, IEEE Transactions on Systems, Man, and Cybernetics.

[36]  Fouad Bennis,et al.  Minimum inertial parameters of robots with parallelogram closed loops , 1991, IEEE Trans. Syst. Man Cybern..

[37]  Mark W. Spong,et al.  Robot dynamics and control , 1989 .

[38]  Haruhisa Kawasaki,et al.  Terminal-link parameter estimation of robotic manipulators , 1988, IEEE J. Robotics Autom..

[39]  Wisama Khalil,et al.  Identification of the dynamic parameters of a closed loop robot , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[40]  J. Uicker.  Dynamic Force Analysis of Spatial Linkages , 1967 .

[41]  R. Paul.  Robot manipulators : mathematics, programming, and control : the computer control of robot manipulators , 1981 .

[42]  Maxime Gautier,et al.  Identification of Robots Dynamics , 1986 .

[43]  David E. Orin,et al.  Efficient Dynamic Computer Simulation of Robotic Mechanisms , 1982 .

[44]  Oussama Khatib,et al.  The explicit dynamic model and inertial parameters of the PUMA 560 arm , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[45]  Wisama Khalil,et al.  On the identification of the inertial parameters of robots , 1988, Proceedings of the 27th IEEE Conference on Decision and Control.

[46]  M. Gautier,et al.  Exciting Trajectories for the Identification of Base Inertial Parameters of Robots , 1992 .

[47]  Carlos Canudas de Wit,et al.  Adaptive Friction Compensation in Robot Manipulators: Low Velocities , 1991, Int. J. Robotics Res..

[48]  M. Renaud.  Calcul de la matrice Jacobienne nécessaire à la commande coordonnée d'un manipulateur , 1980 .

[49]  Samad Hayati,et al.  Robot arm geometric link parameter estimation , 1983, The 22nd IEEE Conference on Decision and Control.

[50]  John M. Lewis,et al.  A new method for autonomous robot calibration , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[51]  Koichi Osuka,et al.  Base parameters of manipulator dynamic models , 1990, IEEE Trans. Robotics Autom..

[52]  A. Laub,et al.  The singular value decomposition: Its computation and some applications , 1980 .

[53]  Wisama Khalil,et al.  Identifiable Parameters and Optimum Configurations for Robots Calibration , 1991, Robotica.

[54]  William M. Silver.  On the Equivalence of Lagrangian and Newton-Euler Dynamics for Manipulators , 1982 .

[55]  Pradeep K. Khosla.  Categorization of parameters in the dynamic robot model , 1989, IEEE Trans. Robotics Autom..

[56]  J. Michael McCarthy,et al.  Introduction to theoretical kinematics , 1990 .

[57]  Carlos Canudas de Wit,et al.  Robust adaptive friction compensation , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[58]  Wisama Khalil,et al.  Direct calculation of minimum set of inertial parameters of serial robots , 1990, IEEE Trans. Robotics Autom..

[59]  Bruno Siciliano,et al.  Lagrange and Newton-Euler dynamic modeling of a gear-driven robot manipulator with inclusion of motor inertia effects , 1995, Adv. Robotics.

[60]  J. Ziegert,et al.  Basic considerations for robot calibration , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[61]  J. Denavit,et al.  A kinematic notation for lower pair mechanisms based on matrices , 1955 .

[62]  C. C. Wit,et al.  Parameters Identification of Robots Manipulators via Sequential Hybrid Estimation Algorithms , 1990 .

[63]  Beno Benhabib,et al.  A complete generalized solution to the inverse kinematics of robots , 1985, IEEE J. Robotics Autom..

[64]  V. Potkonjak,et al.  Scientific Fundamentals of Robotics 1: Dynamics of Manipulation , Theory and Application , 1982 .

[65]  J. Denavit,et al.  A kinematic notation for lowerpair mechanism based on matrices , 1955 .

[66]  M. Gautier.  Numerical calculation of the base inertial parameters of robots , 1991, J. Field Robotics.

[67]  R. Paul,et al.  Computationally Efficient Kinematics for Manipulators with Spherical Wrists Based on the Homogeneous Transformation Representation , 1986 .

[68]  J. W. Humberston.  Classical mechanics , 1980, Nature.

[69]  Bruno Siciliano,et al.  Modeling and Control of Robot Manipulators , 1995 .

[70]  Roy Featherstone,et al.  Position and Velocity Transformations Between Robot End-Effector Coordinates and Joint Angles , 1983 .

[71]  Daniel E. Whitney,et al.  Industrial Robot Forward Calibration Method and Results , 1986 .

[72]  H. Kawasaki,et al.  Terminal-Link Parameter Estimation and Trajectory Control of Robotic Manipulators , 1985 .

[73]  Jorge Angeles,et al.  Spatial kinematic chains , 1982 .

[74]  Ronald L. Huston,et al.  Dynamics of Multibody Systems , 1988 .

[75]  Bahram Ravani,et al.  An overview of robot calibration , 1987, IEEE Journal on Robotics and Automation.

[76]  K. Yamamoto,et al.  Robot autonomous error calibration method for off line programming system , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[77]  J. Y. S. Luh,et al.  On-Line Computational Scheme for Mechanical Manipulators , 1980 .

[78]  M. Vukobratovic,et al.  Dynamics of articulated open-chain active mechanisms , 1976 .

[79]  Hong Y. Lee,et al.  Displacement analysis of the general spatial 7-link 7R mechanism , 1988 .

[80]  Robert L. Galloway,et al.  A Single-Point Calibration Technique for a Six Degree-of-Freedom Articulated Arm , 1994, Int. J. Robotics Res..

[81]  Koichi Osuka,et al.  A New Identification Method for Serial Manipulator Arms , 1984 .

[82]  Pasquale Chiacchio,et al.  Identification of dynamic parameters and feedforward control for a conventional industrial manipulator , 1994 .

[83]  Brian Armstrong,et al.  On Finding Exciting Trajectories for Identification Experiments Involving Systems with Nonlinear Dynamics , 1989, Int. J. Robotics Res..

[84]  Chi-Haur Wu,et al.  A Kinematic CAD Tool for the Design and Control of a Robot Manipulator , 1984 .

[85]  J. Hollerbach,et al.  Wrist-Partitioned, Inverse Kinematic Accelerations and Manipulator Dynamics , 1983 .

[86]  Shir-Kuan Lin,et al.  An identification method for estimating the inertia parameters of a manipulator , 1992, J. Field Robotics.

[87]  Veljko Potkonjak,et al.  Dynamics of Manipulation Robots , 1982 .

[88]  In-Joong Ha,et al.  An efficient estimation algorithm for the model parameters of robotic manipulators , 1989, IEEE Trans. Robotics Autom..

[89]  Friedrich M. Wahl,et al.  Identification of robot dynamics with differential and integral models: a comparison , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[90]  Georges Bastin,et al.  Identification of the barycentric parameters of robot manipulators from external measurements , 1992, Autom..