Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review

[1]  Tomasz Wierzbicki,et al.  Mechanism of strengthening of battery resistance under dynamic loading , 2019, International Journal of Impact Engineering.

[2]  Shriram Santhanagopalan,et al.  Dynamic mechanical behavior of lithium-ion pouch cells subjected to high-velocity impact , 2019, Composite Structures.

[3]  M. Hargather,et al.  Experimental Quantification of Vent Mechanism Flow Parameters in 18650 Format Lithium Ion Batteries , 2019, Journal of Fluids Engineering.

[4]  Jinhua Sun,et al.  Non-dimensional analysis of the criticality of Li-ion battery thermal runaway behavior. , 2019, Journal of hazardous materials.

[5]  P. Mukherjee,et al.  Chemical and mechanical degradation and mitigation strategies for Si anodes , 2019, Journal of Power Sources.

[6]  D. Fang,et al.  A Simultaneous Multiscale and Multiphysics Model and Numerical Implementation of a Core-Shell Model for Lithium-Ion Full-Cell Batteries , 2019, Journal of Applied Mechanics.

[7]  W. Lu,et al.  A consistently coupled multiscale mechanical–electrochemical battery model with particle interaction and its validation , 2019, Journal of the Mechanics and Physics of Solids.

[8]  P. Mukherjee,et al.  Materials by Design: Tailored Morphology and Structures of Carbon Anodes for Enhanced Battery Safety. , 2019, ACS applied materials & interfaces.

[9]  Xiangzhu Gao,et al.  Modeling of contact stress among compound particles in high energy lithium-ion battery , 2019, Energy Storage Materials.

[10]  Lubing Wang,et al.  A detailed computational model for cylindrical lithium-ion batteries under mechanical loading: From cell deformation to short-circuit onset , 2019, Journal of Power Sources.

[11]  Jing Zhao,et al.  Unlocking the significant role of shell material for lithium-ion battery safety , 2018, Materials & Design.

[12]  Binghe Liu,et al.  Safety issues caused by internal short circuits in lithium-ion batteries , 2018 .

[13]  Andrew M. Colclasure,et al.  Resolving the discrepancy in tortuosity factor estimation for Li-Ion battery electrodes through micro-macro modeling and experiment , 2018 .

[14]  Jianqiu Li,et al.  Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components , 2018, Applied Energy.

[15]  Wei Li,et al.  Comparative study of mechanical-electrical-thermal responses of pouch, cylindrical, and prismatic lithium-ion cells under mechanical abuse , 2018, Science China Technological Sciences.

[16]  E Jiaqiang,et al.  Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review , 2018, Applied Thermal Engineering.

[17]  Karim Zaghib,et al.  State of charge influence on thermal reactions and abuse tests in commercial lithium-ion cells , 2018, Journal of Power Sources.

[18]  Binghe Liu,et al.  Mechanical integrity of 18650 lithium-ion battery module: Packing density and packing mode , 2018, Engineering Failure Analysis.

[19]  E. Sahraei,et al.  Effects of electrolyte, loading rate and location of indentation on mechanical integrity of li-ion pouch cells , 2018, Journal of Power Sources.

[20]  L. Saw,et al.  Novel thermal management system using mist cooling for lithium-ion battery packs , 2018, Applied Energy.

[21]  C. Zhang,et al.  Mechanical characterization and modeling for anodes and cathodes in lithium-ion batteries , 2018, Journal of Power Sources.

[22]  Kaiqi Xu,et al.  Experimental Analysis of Thermal Runaway Propagation Risk within 18650 Lithium-Ion Battery Modules , 2018 .

[23]  M. Carvalho,et al.  The lithium-ion battery: State of the art and future perspectives , 2018, Renewable and Sustainable Energy Reviews.

[24]  José L. Bernal-Agustín,et al.  A computationally efficient Li-ion electrochemical battery model for long-term analysis of stand-alone renewable energy systems , 2018 .

[25]  Yong Xia,et al.  Testing and Modeling the Mechanical Properties of the Granular Materials of Graphite Anode , 2018 .

[26]  Khalil Amine,et al.  Perspectives of automotive battery R&D in China, Germany, Japan, and the USA , 2018 .

[27]  N. Parab,et al.  State-of-Charge and Deformation-Rate Dependent Mechanical Behavior of Electrochemical Cells , 2018 .

[28]  R. Dashwood,et al.  Experimental study of internal and external short circuits of commercial automotive pouch lithium-ion cells , 2018 .

[29]  Michael G. Pecht,et al.  Exploding E-Cigarettes: A Battery Safety Issue , 2018, IEEE Access.

[30]  B. Liu,et al.  Coupling Effect of State-of-Health and State-of-Charge on the Mechanical Integrity of Lithium-Ion Batteries , 2018 .

[31]  Zhenhai Gao,et al.  Influence of coupling of overcharge state and short-term cycle on the mechanical integrity behavior of 18650 Li-ion batteries subject to lateral compression , 2018 .

[32]  Wei Li,et al.  A review of safety-focused mechanical modeling of commercial lithium-ion batteries , 2018 .

[33]  M. Corazza,et al.  Thermal injury caused by the explosion of a lithium‐ion mobile phone battery , 2018, Journal of the European Academy of Dermatology and Venereology : JEADV.

[34]  K. Smith,et al.  Secondary-Phase Stochastics in Lithium-Ion Battery Electrodes. , 2018, ACS applied materials & interfaces.

[35]  E. Sahraei,et al.  Adhesion strength of the cathode in lithium-ion batteries under combined tension/shear loadings , 2018 .

[36]  Hui Zhao,et al.  Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading , 2017 .

[37]  Joeri Van Mierlo,et al.  Streamline three-dimensional thermal model of a lithium titanate pouch cell battery in extreme temperature conditions with module simulation , 2017 .

[38]  Eric Darcy,et al.  Identifying the Cause of Rupture of Li‐Ion Batteries during Thermal Runaway , 2017, Advanced science.

[39]  Wen Tong Chong,et al.  Computational fluid dynamics simulation on open cell aluminium foams for Li-ion battery cooling system , 2017 .

[40]  Tomasz Wierzbicki,et al.  Dynamic impact tests on lithium-ion cells , 2017 .

[41]  Mingyi Chen,et al.  Study of the fire hazards of lithium-ion batteries at different pressures , 2017 .

[42]  Thomas Hanemann,et al.  Preventing Li-ion cell explosion during thermal runaway with reduced pressure , 2017 .

[43]  Yun-Ze Li,et al.  A forced gas cooling circle packaging with liquid cooling plate for the thermal management of Li-ion batteries under space environment , 2017 .

[44]  Chao Zhang,et al.  Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries , 2017 .

[45]  N. Chawla,et al.  Quantifying Electrochemical Reactions and Properties of Amorphous Silicon in a Conventional Lithium-Ion Battery Configuration , 2017 .

[46]  Jie Lv,et al.  A multilayer electro-thermal model of pouch battery during normal discharge and internal short circuit process , 2017 .

[47]  Eric Darcy,et al.  Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits. , 2017 .

[48]  Sergiy Kalnaus,et al.  Mechanical behavior and failure mechanisms of Li-ion battery separators , 2017 .

[49]  Xiaosong Huang,et al.  A multiphysics microstructure-resolved model for silicon anode lithium-ion batteries , 2017 .

[50]  Jun Xu,et al.  Investigation of effects of design parameters on the internal short-circuit in cylindrical lithium-ion batteries , 2017 .

[51]  R. Yuen,et al.  An experimental study about the effect of arrangement on the fire behaviors of lithium-ion batteries , 2017, Journal of Thermal Analysis and Calorimetry.

[52]  Pavan Badami,et al.  Can Li-Ion batteries be the panacea for automotive applications? , 2017 .

[53]  Takao Inoue,et al.  Are All-Solid-State Lithium-Ion Batteries Really Safe?-Verification by Differential Scanning Calorimetry with an All-Inclusive Microcell. , 2017, ACS applied materials & interfaces.

[54]  Tomasz Wierzbicki,et al.  Deformation and failure mechanisms of 18650 battery cells under axial compression , 2016 .

[55]  H. Zheng,et al.  On the fragmentation of active material secondary particles in lithium ion battery cathodes induced by charge cycling , 2016 .

[56]  Linmin Wu,et al.  Three-Dimensional Finite Element Study on Li Diffusion Induced Stress in FIB-SEM Reconstructed LiCoO2 Half Cell , 2016 .

[57]  Jun Xu,et al.  Integrated computation model of lithium-ion battery subject to nail penetration , 2016 .

[58]  Elham Sahraei,et al.  Li-ion Battery Separators, Mechanical Integrity and Failure Mechanisms Leading to Soft and Hard Internal Shorts , 2016, Scientific Reports.

[59]  Elham Sahraei,et al.  Microscale failure mechanisms leading to internal short circuit in Li-ion batteries under complex loading scenarios , 2016 .

[60]  Xinyi Wang,et al.  Computational model of 18650 lithium-ion battery with coupled strain rate and SOC dependencies , 2016 .

[61]  Christian Miehe,et al.  A phase‐field model for chemo‐mechanical induced fracture in lithium‐ion battery electrode particles , 2016 .

[62]  K J Nicoll,et al.  Thigh burns from exploding e-cigarette lithium ion batteries: First case series. , 2016, Burns : journal of the International Society for Burn Injuries.

[63]  Gregor Gstrein,et al.  Method for Determination of the Internal Short Resistance and Heat Evolution at Different Mechanical Loads of a Lithium Ion Battery Cell Based on Dummy Pouch Cells , 2016 .

[64]  Jun Xu,et al.  Coupled effect of strain rate and solvent on dynamic mechanical behaviors of separators in lithium ion batteries , 2016 .

[65]  Hui Wu,et al.  A heatproof separator for lithium-ion battery based on nylon66 nanofibers , 2016, Ionics.

[66]  Iek-Heng Chu,et al.  Thermal Stability and Reactivity of Cathode Materials for Li-Ion Batteries. , 2016, ACS applied materials & interfaces.

[67]  Ralph E. White,et al.  A lumped model of venting during thermal runaway in a cylindrical Lithium Cobalt Oxide lithium-ion cell , 2016 .

[68]  M. Cho,et al.  Multi-scale analysis of an electrochemical model including coupled diffusion, stress, and nonideal solution in a silicon thin film anode , 2016 .

[69]  Xiaosong Huang,et al.  Study of lithium diffusivity in amorphous silicon via finite element analysis , 2016 .

[70]  P. Liu,et al.  A review of carbon materials and their composites with alloy metals for sodium ion battery anodes , 2016 .

[71]  Guy Marlair,et al.  Safety focused modeling of lithium-ion batteries: A review , 2016 .

[72]  Srdjan Simunovic,et al.  Internal configuration of prismatic lithium-ion cells at the onset of mechanically induced short circuit , 2016 .

[73]  Simon Franz Heindl,et al.  Evaluating the trade-off between mechanical and electrochemical performance of separators for lithium-ion batteries: Methodology and application , 2016 .

[74]  Jun Xu,et al.  State of Charge Dependent Mechanical Integrity Behavior of 18650 Lithium-ion Batteries , 2016, Scientific Reports.

[75]  P. Kumta,et al.  Effect of silicon configurations on the mechanical integrity of silicon–carbon nanotube heterostructured anode for lithium ion battery: A computational study , 2016 .

[76]  D. Mohr,et al.  Anisotropic viscoplasticity and fracture of fine grained metallic aluminum foil used in Li-ion batteries , 2016 .

[77]  A. Pesaran,et al.  A representative-sandwich model for simultaneously coupled mechanical-electrical-thermal simulation of a lithium-ion cell under quasi-static indentation tests , 2015 .

[78]  Prashanth H. Jampani,et al.  Guar gum: Structural and electrochemical characterization of natural polymer based binder for silicon–carbon composite rechargeable Li-ion battery anodes , 2015 .

[79]  Michael Pecht,et al.  A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries , 2015 .

[80]  Mgd Marc Geers,et al.  A multiscale-compatible approach in modeling ionic transport in the electrolyte of (Lithium ion) batteries , 2015 .

[81]  Jiangwei Wang,et al.  High damage tolerance of electrochemically lithiated silicon , 2015, Nature Communications.

[82]  Tomasz Wierzbicki,et al.  Modelling of cracks developed in lithium-ion cells under mechanical loading , 2015 .

[83]  Chao Zhang,et al.  Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse , 2015 .

[84]  Kyung Min Jeong,et al.  Investigation on internal short circuits of lithium polymer batteries with a ceramic-coated separator during nail penetration , 2015 .

[85]  Srikanth Allu,et al.  Multiscale modeling and characterization for performance and safety of lithium-ion batteries , 2015 .

[86]  Jun Xu,et al.  Dynamic mechanical integrity of cylindrical lithium-ion battery cell upon crushing , 2015 .

[87]  Mingyi Chen,et al.  Investigation on the thermal hazards of 18650 lithium ion batteries by fire calorimeter , 2015, Journal of Thermal Analysis and Calorimetry.

[88]  Tomasz Wierzbicki,et al.  Characterization of plasticity and fracture of shell casing of lithium-ion cylindrical battery , 2015 .

[89]  C. Shu,et al.  Effects of thermal hazard on 18650 lithium-ion battery under different states of charge , 2015, Journal of Thermal Analysis and Calorimetry.

[90]  O. Schmidt,et al.  High-rate amorphous SnO2 nanomembrane anodes for Li-ion batteries with a long cycling life. , 2015, Nanoscale.

[91]  Ya-Pu Zhao,et al.  A phase field model coupling lithium diffusion and stress evolution with crack propagation and application in lithium ion batteries. , 2015, Physical chemistry chemical physics : PCCP.

[92]  Per Blomqvist,et al.  Characteristics of lithium-ion batteries during fire tests , 2014 .

[93]  Ilya Avdeev,et al.  Structural analysis and experimental characterization of cylindrical lithium-ion battery cells subject to lateral impact , 2014 .

[94]  Mingyi Chen,et al.  Experimental Study on the Combustion Characteristics of Primary Lithium Batteries Fire , 2014, Fire Technology.

[95]  Peng Wang,et al.  Thickness-dependent fracture of amorphous carbon coating on SnO2 nanowire electrodes , 2014 .

[96]  Jaephil Cho,et al.  A New High Power LiNi0.81Co0.1Al0.09O2 Cathode Material for Lithium‐Ion Batteries , 2014 .

[97]  H. Na,et al.  Polydopamine hydrophilic modification of polypropylene separator for lithium ion battery , 2014 .

[98]  Huajian Gao,et al.  Microscopic model for fracture of crystalline Si nanopillars during lithiation , 2014 .

[99]  Minggao Ouyang,et al.  Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry , 2014 .

[100]  Tatsuo Horiba,et al.  Lithium-Ion Battery Systems , 2014, Proceedings of the IEEE.

[101]  F. Jiang,et al.  Thermal analyses of LiCoO2 lithium-ion battery during oven tests , 2014 .

[102]  Kuan-Cheng Chiu,et al.  An electrochemical modeling of lithium-ion battery nail penetration , 2014 .

[103]  Xiaosong Huang,et al.  A Microstructural Resolved Model for the Stress Analysis of Lithium-Ion Batteries , 2014 .

[104]  Karim Zaghib,et al.  Comparative Issues of Cathode Materials for Li-Ion Batteries , 2014 .

[105]  Tao Sun,et al.  Deformation and fracture behaviors of microporous polymer separators for lithium ion batteries , 2014 .

[106]  G. Lindbergh,et al.  The effect of lithium-intercalation on the mechanical properties of carbon fibres , 2014 .

[107]  P. Ramadass,et al.  Study of internal short in a Li-ion cell-II. Numerical investigation using a 3D electrochemical-thermal model , 2014 .

[108]  W. Lai,et al.  Mechanical behavior of representative volume elements of lithium-ion battery modules under various loading conditions , 2014 .

[109]  Xiaosong Huang,et al.  A multiphysics model for the in situ stress analysis of the separator in a lithium-ion battery cell , 2014 .

[110]  P. Ramadass,et al.  Study of internal short in a Li-ion cell I. Test method development using infra-red imaging technique , 2014 .

[111]  Christopher J. Orendorff,et al.  Evaluation of mechanical abuse techniques in lithium ion batteries , 2014 .

[112]  W. Lai,et al.  Computational models for simulations of lithium-ion battery cells under constrained compression tests , 2013 .

[113]  T. Wierzbicki,et al.  Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells , 2013 .

[114]  V. Srinivasan,et al.  Stress and Strain in Silicon Electrode Models , 2013 .

[115]  Jochen Rohrer,et al.  Insights into Degradation of Si Anodes from First-Principle Calculations , 2013 .

[116]  H. Wiemhöfer,et al.  Impact of delithiated Li0FePO4 on the decomposition of LiPF6-based electrolyte studied by accelerating rate calorimetry , 2013 .

[117]  Yang-Kook Sun,et al.  Titanium‐Based Anode Materials for Safe Lithium‐Ion Batteries , 2013 .

[118]  T. Wierzbicki,et al.  Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions , 2012 .

[119]  Xiaosong Huang.  A lithium-ion battery separator prepared using a phase inversion process , 2012 .

[120]  Lars Greve,et al.  Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells , 2012 .

[121]  Yan Yu,et al.  A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions , 2012 .

[122]  Qingsong Wang,et al.  Thermal runaway caused fire and explosion of lithium ion battery , 2012 .

[123]  Allan F. Bower,et al.  A simple finite element model of diffusion, finite deformation, plasticity and fracture in lithium ion insertion electrode materials , 2012 .

[124]  Rajlakshmi Purkayastha,et al.  An integrated 2-D model of a lithium ion battery: the effect of material parameters and morphology on storage particle stress , 2012 .

[125]  T. Wierzbicki,et al.  Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity , 2012 .

[126]  Xiangming He,et al.  Electro-thermal modeling and experimental validation for lithium ion battery , 2012 .

[127]  B. Min,et al.  Characterization of poly(vinylidene fluoride) flat sheet membranes prepared in various ratios of water/ethanol for separator of li-ion batteries: Morphology and other properties , 2011 .

[128]  Azadeh Sheidaei,et al.  Mechanical behavior of a battery separator in electrolyte solutions , 2011 .

[129]  Xiaosong Huang,et al.  Modeling stresses in the separator of a pouch lithium-ion cell , 2011 .

[130]  D. Aurbach,et al.  On the Thermal Stability of Olivine Cathode Materials for Lithium-Ion Batteries , 2011 .

[131]  Zonghai Chen,et al.  Multi-scale study of thermal stability of lithiated graphite , 2011 .

[132]  H. Maleki,et al.  Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells , 2011 .

[133]  Doron Aurbach,et al.  Challenges in the development of advanced Li-ion batteries: a review , 2011 .

[134]  Chi-Min Shu,et al.  Thermal explosion hazards on 18650 lithium ion batteries with a VSP2 adiabatic calorimeter. , 2011, Journal of hazardous materials.

[135]  Ganesan Nagasubramanian,et al.  Experimental triggers for internal short circuits in lithium-ion cells , 2011 .

[136]  Haiyan Wang,et al.  Oxygen Evolution in Overcharged LixNi1/3Co1/3Mn1/3O2 Electrode and Its Thermal Analysis Kinetics , 2011 .

[137]  D. Aurbach,et al.  A review of advanced and practical lithium battery materials , 2011 .

[138]  Zhigang Suo,et al.  Large Plastic Deformation in High-Capacity Lithium-Ion Batteries Caused by Charge and Discharge , 2011 .

[139]  A. Bower,et al.  A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell , 2011, 1107.6020.

[140]  T. Fuller,et al.  A Critical Review of Thermal Issues in Lithium-Ion Batteries , 2011 .

[141]  G. Han,et al.  Preparation of a trilayer separator and its application to lithium-ion batteries , 2010 .

[142]  Xiaosong Huang,et al.  A multi-scale approach for the stress analysis of polymeric separators in a lithium-ion battery , 2010 .

[143]  Yue Qi,et al.  Threefold Increase in the Young’s Modulus of Graphite Negative Electrode during Lithium Intercalation , 2010 .

[144]  Binggang Cao,et al.  Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application , 2010 .

[145]  J. Goodenough,et al.  Challenges for Rechargeable Li Batteries , 2010 .

[146]  Weishan Li,et al.  Theoretical investigations on oxidative stability of solvents and oxidative decomposition mechanism of ethylene carbonate for lithium ion battery use. , 2009, The journal of physical chemistry. B.

[147]  P. Ramadass,et al.  Analysis of internal short-circuit in a lithium ion cell , 2009 .

[148]  H. Maleki,et al.  Internal short circuit in Li-ion cells , 2009 .

[149]  Qingsong Wang,et al.  Effects of solvents and salt on the thermal stability of charged LiCoO2 , 2009 .

[150]  J. Yamaki,et al.  Thermal Behavior of Charged Graphite and Li x CoO2 in Electrolytes Containing Alkyl Phosphate for Lithium-Ion Cells , 2009 .

[151]  E. Yoo,et al.  Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. , 2008, Nano letters.

[152]  S. Moon,et al.  A study on carbon-coated LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries , 2008 .

[153]  Cyrus Ashtiani,et al.  Analysis of Battery Safety and Hazards' Risk Mitigation , 2008 .

[154]  Sang‐young Lee,et al.  Performances and thermal stability of LiCoO2 cathodes encapsulated by a new gel polymer electrolyte , 2007 .

[155]  Junwei Jiang,et al.  The reactivity of delithiated Li(Ni1/3Co1/3Mn1/3)O2, Li(Ni0.8Co0.15Al0.05)O2 or LiCoO2 with non-aqueous electrolyte , 2007 .

[156]  Ketack Kim,et al.  Effect of carbon coating on LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries , 2007 .

[157]  Gi‐Heon Kim,et al.  A three-dimensional thermal abuse model for lithium-ion cells , 2007 .

[158]  Karim Zaghib,et al.  Accelerating rate calorimetry studies of the reactions between ionic liquids and charged lithium ion battery electrode materials , 2007 .

[159]  Qingsong Wang,et al.  Thermal Stability of Delithiated LiMn2O4 with Electrolyte for Lithium-Ion Batteries , 2007 .

[160]  C. M. Roland,et al.  High strain rate mechanical behavior of polyurea , 2007 .

[161]  Shengbo Zhang.  A review on the separators of liquid electrolyte Li-ion batteries , 2007 .

[162]  Ralph E. White,et al.  Review of Models for Predicting the Cycling Performance of Lithium Ion Batteries , 2006 .

[163]  T. P. Kumar,et al.  Safety mechanisms in lithium-ion batteries , 2006 .

[164]  Qingsong Wang,et al.  Thermal stability of LiPF6/EC + DEC electrolyte with charged electrodes for lithium ion batteries , 2005 .

[165]  Ganesan Nagasubramanian,et al.  Effects of additives on thermal stability of Li ion cells , 2005 .

[166]  Seung-Boo Jung,et al.  Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing , 2005 .

[167]  Kang Xu,et al.  An inorganic composite membrane as the separator of Li-ion batteries , 2005 .

[168]  Kang Xu,et al.  Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. , 2004, Chemical reviews.

[169]  J. Dahn,et al.  Effects of particle size and electrolyte salt on the thermal stability of Li0.5CoO2 , 2004 .

[170]  E. Roth,et al.  Thermal abuse performance of high-power 18650 Li-ion cells , 2004 .

[171]  Ilias Belharouak,et al.  Li(Ni1/3Co1/3Mn1/3)O2 as a suitable cathode for high power applications , 2003 .

[172]  Kyriakos Komvopoulos,et al.  Electrical contact resistance theory for conductive rough surfaces , 2003 .

[173]  T. Ohzuku,et al.  Lithium insertion material of LiNi 1/2Mn 1/2O 2 for advanced lithium-ion batteries , 2003 .

[174]  J. Yamaki,et al.  Thermal stability of electrolytes with LixCoO2 cathode or lithiated carbon anode , 2003 .

[175]  C. Geankoplis,et al.  Transport processes and separation process principles : (includes unit operations) , 2003 .

[176]  P. Butler,et al.  Lithium battery thermal models , 2002 .

[177]  T. Abe,et al.  Surface Film Formation on a Graphite Negative Electrode in Lithium-Ion Batteries: Atomic Force Microscopy Study on the Effects of Film-Forming Additives in Propylene Carbonate Solutions , 2001 .

[178]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[179]  D. D. MacNeil,et al.  Layered Cathode Materials Li [ Ni x Li ( 1 / 3 − 2x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 for Lithium-Ion Batteries , 2001 .

[180]  J. Dahn,et al.  Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells , 2001 .

[181]  J. Kerr,et al.  Chemical reactivity of PF{sub 5} and LiPF{sub 6} in ethylene carbonate/dimethyl carbonate solutions , 2001 .

[182]  S. Tobishima.  Lithium Ion Cell Safety , 2000 .

[183]  J. Selman,et al.  Thermal modeling and design considerations of lithium-ion batteries , 1999 .

[184]  M. Broussely,et al.  On safety of lithium-ion cells , 1999 .

[185]  J. Yamaki,et al.  A consideration of lithium cell safety , 1999 .

[186]  H. Maleki,et al.  Thermal Stability Studies of Li‐Ion Cells and Components , 1999 .

[187]  J. Dahn,et al.  Accelerating Rate Calorimetry Study on the Thermal Stability of Lithium Intercalated Graphite in Electrolyte. II. Modeling the Results and Predicting Differential Scanning Calorimeter Curves , 1999 .

[188]  J. Dahn,et al.  Accelerating Rate Calorimetry Study on the Thermal Stability of Lithium Intercalated Graphite in Electrolyte. I. Experimental , 1999 .

[189]  J. Tarascon,et al.  Differential Scanning Calorimetry Study of the Reactivity of Carbon Anodes in Plastic Li‐Ion Batteries , 1998 .

[190]  Z. Zhang,et al.  Differential scanning calorimetry material studies: implications for the safety of lithium-ion cells , 1998 .

[191]  M. Doyle,et al.  Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .

[192]  John Newman,et al.  A General Energy Balance for Battery Systems , 1984 .

[193]  K. H. Young,et al.  Ethyl acetate as a substitute for diethyl ether in the formalin-ether sedimentation technique , 1979, Journal of clinical microbiology.

[194]  F. Williams.  Diffusion and heat transfer in chemical kinetics: D. A. Frank-Kamenetskii , 1971 .

[195]  Robbin C. Anderson,et al.  Some Problems in Chemical Kinetics and Reactivity. , 1959 .

[196]  Andrew M. Colclasure,et al.  A Reformulation of the Pseudo2D Battery Model Coupling Large Electrochemical-Mechanical Deformations at Particle and Electrode Levels , 2019, Journal of The Electrochemical Society.

[197]  Jun Xu,et al.  Unlocking the coupling mechanical-electrochemical behavior of lithium-ion battery upon dynamic mechanical loading , 2019, Energy.

[198]  Xiangzhu Gao,et al.  A Multiphysics Computational Framework for Cylindrical Battery Behavior upon Mechanical Loading Based on LS-DYNA , 2019, Journal of The Electrochemical Society.

[199]  Yong Xia,et al.  State-of-Charge Dependence of Mechanical Response of Lithium-Ion Batteries: A Result of Internal Stress , 2018 .

[200]  Xuning Feng,et al.  Thermal runaway mechanism of lithium ion battery for electric vehicles: A review , 2018 .

[201]  Zhongwei Deng,et al.  Polynomial approximation pseudo-two-dimensional battery model for online application in embedded battery management system , 2018 .

[202]  P. Van den Bossche,et al.  A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles , 2018 .

[203]  David R. Noble,et al.  Editors' Choice—Mesoscale Analysis of Conductive Binder Domain Morphology in Lithium-Ion Battery Electrodes , 2018 .

[204]  L. Cancio,et al.  Thermal injury patterns associated with electronic cigarettes. , 2017, International journal of burns and trauma.

[205]  Minggao Ouyang,et al.  Internal short circuit trigger method for lithium-ion battery based on shape memory alloy , 2017 .

[206]  G. Blomgren.  The development and future of lithium ion batteries , 2017 .

[207]  Chien‐Fan Chen,et al.  Probing the Role of Electrode Microstructure in the Lithium-Ion Battery Thermal Behavior , 2017 .

[208]  P. Mukherjee,et al.  Mechanistic Analysis of Mechano-Electrochemical Interaction in Silicon Electrodes with Surface Film , 2017 .

[209]  Minggao Ouyang,et al.  Fusing phenomenon of lithium-ion battery internal short circuit , 2017 .

[210]  Kurt Maute,et al.  Numerical Modeling of Damage Evolution Phenomenon in Solid-State Lithium-Ion Batteries , 2017 .

[211]  O. Keles,et al.  Functionally Graded Si Based Thin Films as Negative Electrodes for Next Generation Lithium Ion Batteries , 2016 .

[212]  Pallab Barai,et al.  Reduced Order Modeling of Mechanical Degradation Induced Performance Decay in Lithium-Ion Battery Porous Electrodes , 2015 .

[213]  Wei Zhao,et al.  Modeling Nail Penetration Process in Large-Format Li-Ion Cells , 2015 .

[214]  Carlos F. Lopez,et al.  Characterization of Lithium-Ion Battery Thermal Abuse Behavior Using Experimental and Computational Analysis , 2015 .

[215]  Wei Zhao,et al.  Modeling Internal Shorting Process in Large-Format Li-Ion Cells , 2015 .

[216]  Heping Zhang,et al.  An experimental study on burning behaviors of 18650 lithium ion batteries using a cone calorimeter , 2015 .

[217]  Craig B. Arnold,et al.  Mechanical Properties of a Battery Separator under Compression and Tension , 2014 .

[218]  Victor E. Brunini,et al.  A Framework for Three-Dimensional Mesoscale Modeling of Anisotropic Swelling and Mechanical Deformation in Lithium-Ion Electrodes , 2014 .

[219]  W. Lai,et al.  Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions , 2014 .

[220]  Tao Sun,et al.  A Coupled Penetration-Tension Method for Evaluating the Reliability of Battery Separators , 2014 .

[221]  A. Francis,et al.  Rate- and Temperature-Dependent Material Behavior of a Multilayer Polymer Battery Separator , 2013, Journal of Materials Engineering and Performance.

[222]  Tao Sun,et al.  Unveiling the Roles of Binder in the Mechanical Integrity of Electrodes for Lithium-Ion Batteries , 2013 .

[223]  Partha P. Mukherjee,et al.  Stochastic Analysis of Diffusion Induced Damage in Lithium-Ion Battery Electrodes , 2013 .

[224]  Christopher J. Orendorff,et al.  The Role of Separators in Lithium-Ion Cell Safety , 2012 .

[225]  Vivek B. Shenoy,et al.  Pressure-Gradient Dependent Diffusion and Crack Propagation in Lithiated Silicon Nanowires , 2012 .

[226]  M. Behm,et al.  Investigation of Short-Circuit Scenarios in a Lithium-Ion Battery Cell , 2012 .

[227]  M. Morcrette,et al.  Investigation on the fire-induced hazards of Li-ion battery cells by fire calorimetry , 2012 .

[228]  Pankaj Arora,et al.  Battery separators. , 2004, Chemical reviews.

[229]  Junwei Jiang,et al.  ARC studies of the thermal stability of three different cathode materials: LiCoO2; Li[Ni0.1Co0.8Mn0.1]O2; and LiFePO4, in LiPF6 and LiBoB EC/DEC electrolytes , 2004 .

[230]  R. Spotnitz,et al.  Abuse behavior of high-power, lithium-ion cells , 2003 .

[231]  D. J. Parry,et al.  The Hopkinson Bar , 1999 .

[232]  P. H. Thomas,et al.  On the thermal conduction equation for self-heating materials with surface cooling , 1958 .