Design and Control of a Bio-inspired Human-friendly Robot

The increasing demand for physical interaction between humans and robots has led to an interest in robots that guarantee safe behavior when human contact occurs. However, attaining established levels of performance while ensuring safety creates formidable challenges in mechanical design, actuation, sensing and control. To promote safety without compromising performance, a human-friendly robotic arm has been developed using the concept of hybrid actuation. The new design employs high-power, low-impedance pneumatic artificial muscles augmented with small electrical actuators, distributed compact pressure regulators with proportional valves, and hollow plastic links. The experimental results show that significant performance improvement can be achieved with hybrid actuation over a system with pneumatic muscles alone. In this paper we evaluate the safety of the new robot arm through experiments and simulation, demonstrating that its inertia/power characteristics surpass those of previous human-friendly robots we have developed.

[1]  Alin Albu-Schäffer,et al.  Safety Evaluation of Physical Human-Robot Interaction via Crash-Testing , 2007, Robotics: Science and Systems.

[2]  R. V. Ham,et al.  Pressure Control with On-Off Valves of Pleated Pneumatic Artificial Muscles in a Modular One-Dimensional Rotational Joint , 2003 .

[3]  John T. Feddema,et al.  A capacitance-based proximity sensor for whole arm obstacle avoidance , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[4]  Darwin G. Caldwell,et al.  Control of pneumatic muscle actuators , 1995 .

[5]  O. Khatib,et al.  Real-Time Obstacle Avoidance for Manipulators and Mobile Robots , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[6]  Michael R. Zinn,et al.  A new actuation approach for human-friendly robotic manipulation , 2005 .

[7]  Oussama Khatib,et al.  A hybrid actuation approach for human-friendly robot design , 2008, 2008 IEEE International Conference on Robotics and Automation.

[8]  Antonio Bicchi,et al.  Adaptive simultaneous position and stiffness control for a soft robot arm , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  Dominik Henrich,et al.  Safe human-robot-cooperation: image-based collision detection for industrial robots , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  Alin Albu-Schäffer,et al.  The role of the robot mass and velocity in physical human-robot interaction - Part I: Non-constrained blunt impacts , 2008, 2008 IEEE International Conference on Robotics and Automation.

[11]  Oussama Khatib,et al.  Inertial Properties in Robotic Manipulation: An Object-Level Framework , 1995, Int. J. Robotics Res..

[12]  John Kenneth Salisbury,et al.  Parallel-Coupled Micro-Macro Actuators , 1996, Int. J. Robotics Res..

[13]  Giorgio Grioli,et al.  VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans , 2008, 2008 IEEE International Conference on Robotics and Automation.

[14]  Antonio Bicchi,et al.  Safety for Physical Human-Robot Interaction , 2008, Springer Handbook of Robotics.

[15]  Alin Albu-Schäffer,et al.  State feedback controller for flexible joint robots: a globally stable approach implemented on DLR's light-weight robots , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[16]  Alessandro De Luca,et al.  Collision Detection and Safe Reaction with the DLR-III Lightweight Manipulator Arm , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[17]  G. Hirzinger,et al.  A new variable stiffness design: Matching requirements of the next robot generation , 2008, 2008 IEEE International Conference on Robotics and Automation.

[18]  Antonio Bicchi,et al.  Fast and "soft-arm" tactics [robot arm design] , 2004, IEEE Robotics & Automation Magazine.

[19]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[20]  Cletis R. Booher,et al.  Man-Systems Integration Standards Development Facility Human Factoring Nasa's Human Factors Document , 1994 .

[21]  Matthew E. Kontz.  Haptic control of hydraulic machinery using proportional valves , 2007 .

[22]  B. Tondu,et al.  McKibben artificial muscle can be in accordance with the Hill skeletal muscle model , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[23]  Vladimir J. Lumelsky,et al.  Real-time collision avoidance in teleoperated whole-sensitive robot arm manipulators , 1993, IEEE Trans. Syst. Man Cybern..

[24]  Oussama Khatib,et al.  Air muscle controller design in the distributed macro-mini (DM2) actuation approach , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[25]  Peter S. Thaulad.  Human friendly robot , 2005 .

[26]  Fritz B. Prinz,et al.  Shape deposition manufacturing of heterogeneous structures , 1997 .

[27]  Pierre Lopez,et al.  Modeling and control of McKibben artificial muscle robot actuators , 2000 .

[28]  Alexander Zelinsky,et al.  Quantitative Safety Guarantees for Physical Human-Robot Interaction , 2003, Int. J. Robotics Res..

[29]  John Kenneth Salisbury,et al.  A New Actuation Approach for Human Friendly Robot Design , 2004, Int. J. Robotics Res..

[30]  Blake Hannaford,et al.  Measurement and modeling of McKibben pneumatic artificial muscles , 1996, IEEE Trans. Robotics Autom..

[31]  Jonathan E. Clark,et al.  Fast and Robust: Hexapedal Robots via Shape Deposition Manufacturing , 2002 .

[32]  Stephen P. DeWeerth,et al.  Biologically Inspired Joint Stiffness Control , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[33]  Mark R. Cutkosky,et al.  Force Sensing Robot Fingers using Embedded Fiber Bragg Grating Sensors and Shape Deposition Manufacturing , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[34]  R. Quinn,et al.  Modeling of braided pneumatic actuators for robotic control , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[35]  Bram Vanderborght,et al.  MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: Design and implementation in a biped robot , 2007, Robotics Auton. Syst..

[36]  Donald Russell,et al.  Mechanics and stiffness limitations of a variable stiffness actuator for use in prosthetic limbs , 1999 .

[37]  Michael Levin,et al.  The design and control of an experimental whole-arm manipulator , 1991 .