Investigation on mechanical bending caused thermal runaway of lithium-ion cell

[1]  Zonghou Huang,et al.  Thermal runaway propagation behavior and energy flow distribution analysis of 280 Ah LiFePO4 battery , 2022, Process Safety and Environmental Protection.

[2]  Qiangling Duan,et al.  Electrochemical performance and thermal stability of 18650 lithium-ion battery with water mist after high-temperature impact , 2022, Process Safety and Environmental Protection.

[3]  Gen-wei Wang,et al.  Deformation and Failure Properties of High-Ni Lithium-Ion Battery under Axial Loads , 2021, Materials.

[4]  A. Elmarakbi,et al.  Internal Short Circuit Analysis of Cylindrical Lithium-Ion Cells Due to Structural Failure , 2021, Journal of The Electrochemical Society.

[5]  H. Schweiger,et al.  Review—Review of Safety Aspects of Calendar Aged Lithium Ion Batteries , 2020 .

[6]  Xuning Feng,et al.  Mitigating Thermal Runaway of Lithium-Ion Batteries , 2020 .

[7]  Yanfei Gao,et al.  Internal short circuit and failure mechanisms of lithium-ion pouch cells under mechanical indentation abuse conditions：An experimental study , 2020 .

[8]  J. Bhattacharya,et al.  Review—Understanding the Thermal Runaway Behavior of Li-Ion Batteries through Experimental Techniques , 2019, Journal of The Electrochemical Society.

[9]  Muhammad Sheikh,et al.  Numerical simulation model for short circuit prediction under compression and bending of 18650 cylindrical lithium-ion battery , 2018, Energy Procedia.

[10]  Jianqiu Li,et al.  Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components , 2018, Applied Energy.

[11]  Hui Zhao,et al.  Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading , 2017 .

[12]  Jun Xu,et al.  Integrated computation model of lithium-ion battery subject to nail penetration , 2016 .

[13]  Chao Zhang,et al.  Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse , 2015 .

[14]  Kuan-Cheng Chiu,et al.  An electrochemical modeling of lithium-ion battery nail penetration , 2014 .

[15]  P. Ramadass,et al.  Study of internal short in a Li-ion cell-II. Numerical investigation using a 3D electrochemical-thermal model , 2014 .

[16]  H. Wiemhöfer,et al.  Impact of delithiated Li0FePO4 on the decomposition of LiPF6-based electrolyte studied by accelerating rate calorimetry , 2013 .

[17]  T. Wierzbicki,et al.  Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions , 2012 .

[18]  Lars Greve,et al.  Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells , 2012 .

[19]  Gi‐Heon Kim,et al.  A three-dimensional thermal abuse model for lithium-ion cells , 2007 .

[20]  Qingsong Wang,et al.  Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries , 2006 .

[21]  Yuichi Sato,et al.  Overcharge reaction of lithium-ion batteries , 2005 .

[22]  J. Dahn,et al.  Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells , 2001 .

[23]  F. Larsson,et al.  Gas explosions and thermal runaways during external heating abuse of commercial lithium-ion graphite-LiCoO2 cells at different levels of ageing , 2018 .

[24]  Wei Zhao,et al.  Modeling Nail Penetration Process in Large-Format Li-Ion Cells , 2015 .