The Variable Stiffness Actuator vsaUT-II: Mechanical Design, Modeling, and Identification

In this paper, the rotational variable stiffness actuator vsaUT-II is presented. This actuation system is characterized by the property that the apparent stiffness at the actuator output can be varied independently from its position. This behavior is realized by implementing a variable transmission ratio between the internal elastic elements and the actuator output, i.e., a lever arm with variable pivot point position. The pivot point is moved by a planetary gears mechanism, which acquires a straight motion from only rotations, thereby providing a low-friction transmission. The working principle details of the vsaUT-II are elaborated and the design is presented. The actuator dynamics are described by means of a lumped parameter model. The relevant parameters of the actuator are estimated and identified in the physical setup and measurements are used to validate both the design and the derived model.

[1]  K.W. Hollander,et al.  Adjustable robotic tendon using a 'Jack Spring'/spl trade/ , 2005, 9th International Conference on Rehabilitation Robotics, 2005. ICORR 2005..

[2]  Jae-Bok Song,et al.  Hybrid dual actuator unit: A design of a variable stiffness actuator based on an adjustable moment arm mechanism , 2010, 2010 IEEE International Conference on Robotics and Automation.

[3]  Giorgio Grioli,et al.  VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans , 2008, 2008 IEEE International Conference on Robotics and Automation.

[4]  Shigeki Sugano,et al.  Development of an anthropomorphic force-controlled manipulator WAM-10 , 1997, 1997 8th International Conference on Advanced Robotics. Proceedings. ICAR'97.

[5]  Nikolaos G. Tsagarakis,et al.  A novel actuator with adjustable stiffness (AwAS) , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  Nikolaos G. Tsagarakis,et al.  MACCEPA 2.0: Adjustable compliant actuator with stiffening characteristic for energy efficient hopping , 2009, 2009 IEEE International Conference on Robotics and Automation.

[7]  Stefano Stramigioli,et al.  Variable Stiffness Actuators: A Port-Based Power-Flow Analysis , 2012, IEEE Transactions on Robotics.

[8]  Nikolaos G. Tsagarakis,et al.  A new variable stiffness actuator (CompAct-VSA): Design and modelling , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  S. Stramigioli,et al.  The mVSA-UT: A miniaturized differential mechanism for a continuous rotational variable stiffness actuator , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[10]  Sungchul Kang,et al.  A variable stiffness joint using leaf springs for robot manipulators , 2009, 2009 IEEE International Conference on Robotics and Automation.

[11]  Darwin G. Caldwell,et al.  A nonlinear series elastic actuator for highly dynamic motions , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[12]  Martin Otter,et al.  Modeling and Simulating the Efficiency of Gearboxes and of Planetary Gearboxes , 2002 .

[13]  G. Hirzinger,et al.  A new variable stiffness design: Matching requirements of the next robot generation , 2008, 2008 IEEE International Conference on Robotics and Automation.

[14]  Stefano Stramigioli,et al.  Variable stiffness actuators: A port-based analysis and a comparison of energy efficiency , 2010, 2010 IEEE International Conference on Robotics and Automation.

[15]  Stefano Stramigioli,et al.  A novel energy-efficient rotational variable stiffness actuator , 2011, 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[16]  Stefano Stramigioli,et al.  Energy-Efficient Variable Stiffness Actuators , 2011, IEEE Transactions on Robotics.

[17]  Nikolaos G. Tsagarakis,et al.  AwAS-II: A new Actuator with Adjustable Stiffness based on the novel principle of adaptable pivot point and variable lever ratio , 2011, 2011 IEEE International Conference on Robotics and Automation.

[18]  Stefano Stramigioli,et al.  The vsaUT-II: A novel rotational variable stiffness actuator , 2012, 2012 IEEE International Conference on Robotics and Automation.