Knot-tying with four-piece fixtures

We present a class of fixtures that can be disassembled into four pieces to extract the loosely tied knot. We prove that a fixture can be designed for any particular knot such that the knot can be extracted using only simple pure translations of the four fixture sections. We explore some of the issues raised by our experimental work with these fixtures, which show that simple knots can be tied extremely quickly (less than half a second) and reliably (99% repeatability) using four-piece fixtures.

[1]  Adam Dubrowski,et al.  The Validation of an Instrumented Simulator for the Assessment of Performance and Outcome of Knot Tying Skill: A Pilot Study , 2011, MMVR.

[2]  Lydia E. Kavraki,et al.  Simulated knot tying , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[3]  Dinesh K. Pai,et al.  STRANDS: Interactive Simulation of Thin Solids using Cosserat Models , 2002, Comput. Graph. Forum.

[4]  Howie Choset,et al.  Minimalistic, dynamic, tube climbing robot , 2010, 2010 IEEE International Conference on Robotics and Automation.

[5]  Howie Choset,et al.  Motion Planning for Serpentine Robots , 1998 .

[6]  Roberto Tamassia,et al.  On Embedding a Graph in the Grid with the Minimum Number of Bends , 1987, SIAM J. Comput..

[7]  Roberto Tamassia,et al.  A New Minimum Cost Flow Algorithm with Applications to Graph Drawing , 1996, GD.

[8]  Sara McMains,et al.  Finding feasible mold parting directions using graphics hardware , 2005, SPM '05.

[9]  宮内 隆旨,et al.  Knot tying device , 1997 .

[10]  Hidefumi Wakamatsu,et al.  Dynamic Modeling of Linear Object Deformation Considering Contact with Obstacles , 2006, 2006 9th International Conference on Control, Automation, Robotics and Vision.

[11]  Mitul Saha,et al.  Motion planning for robotic manipulation of deformable linear objects , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[12]  Yong Chen,et al.  A Reverse Glue Approach to Automated Construction of Multi-Piece Molds , 2003 .

[13]  Masayuki INABA,et al.  Hand Eye Coordination in Rope Handling , 1985 .

[14]  John T. Wen,et al.  EndoBot: a robotic assistant in minimally invasive surgeries , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[15]  Mitul Saha,et al.  Manipulation Planning for Deformable Linear Objects , 2007, IEEE Transactions on Robotics.

[16]  Russell H. Taylor,et al.  Medical robotics in computer-integrated surgery , 2003, IEEE Trans. Robotics Autom..

[17]  Hidefumi Wakamatsu,et al.  Static Modeling of Linear Object Deformation Based on Differential Geometry , 2004, Int. J. Robotics Res..

[18]  Matthew P. Bell,et al.  Flexible Object Manipulation , 2010 .

[19]  Shigeru Inui,et al.  Dynamic manipulation of a string using a manipulator-parameter identification and control based on a rigid body link model , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[20]  Haifeng Luo,et al.  Suturing and tying knots assisted by a surgical robot system in laryngeal MIS , 2009, Robotica.

[21]  Liang Lu,et al.  Folding cartons with fixtures: a motion planning approach , 1999, IEEE Trans. Robotics Autom..

[22]  Andrew Blake,et al.  Caging 2D bodies by 1-parameter two-fingered gripping systems , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[23]  S. LaValle,et al.  Motion Planning , 2008, Springer Handbook of Robotics.

[24]  Yonghua Chen,et al.  Determining parting direction based on minimum bounding box and fuzzy logics , 1997 .

[25]  Liang Lu,et al.  Folding cartons with fixtures: a motion planning approach , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[26]  Matthew P. Bell,et al.  Knot tying with single piece fixtures , 2008, 2008 IEEE International Conference on Robotics and Automation.

[27]  B. Ravi,et al.  Decision criteria for computer-aided parting surface design , 1990, Comput. Aided Des..

[28]  J. Gerring.  A case study , 2011, Technology and Society.

[29]  Nancy M. Amato,et al.  Planning motion in completely deformable environments , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[30]  Timothy Bretl,et al.  Mechanics and Quasi-Static Manipulation of Planar Elastic Kinematic Chains , 2013, IEEE Transactions on Robotics.

[31]  Hidefumi Wakamatsu,et al.  Knotting/Unknotting Manipulation of Deformable Linear Objects , 2006, Int. J. Robotics Res..

[32]  Joseph K. Kearney,et al.  A Case Study of Flexible Object Manipulation , 1991, Int. J. Robotics Res..