Towards variable impedance assembly: The VSA peg-in-hole

This paper shows how an accurate peg-in-hole assembly task can be easily achieved with nothing but cheap position sensors when resourcing to Variable Impedance Actuators (VIA). We present the use of a low-cost Variable Stiffness Torso platform, that consists of two 4-DOF non-planar VSA manipulators, for a peg-in-hole assembly task using both arms. One arm holds the peg and the other holds the hole. The task is accomplished without any force measurement and without calling for parallel-manipulator control techniques, exploiting the intrinsic mechanical elasticity of the actuator units. Indeed, a simple position control scheme is required. Simulations and experimental results are reported.

[1]  John J. Craig,et al.  A systematic method of hybrid position/force control of a manipulator , 1979, COMPSAC.

[2]  Mark W. Spong,et al.  Robotica: a Mathematica package for robot analysis , 1994, IEEE Robotics & Automation Magazine.

[3]  Yoshihiko Nakamura,et al.  Skill of compliance with controlled charging/discharging of kinetic energy , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[4]  Yann Bouffard-Vercelli,et al.  Force-controlled assembly with a two-arm robot: How and where to perform it within the workspace , 1993, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93).

[5]  Michael S. Branicky,et al.  Search strategies for peg-in-hole assemblies with position uncertainty , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[6]  Jan F. Broenink,et al.  Peg-in-Hole assembly using Impedance Control with a 6 DOF Robot , 1996 .

[7]  Jae-Bok Song,et al.  Object grasping using a 1 DOF variable stiffness gripper actuated by a hybrid variable stiffness actuator , 2011, 2011 IEEE International Conference on Robotics and Automation.

[8]  Seung-kook Yun,et al.  Compliant manipulation for peg-in-hole: Is passive compliance a key to learn contact motion? , 2008, 2008 IEEE International Conference on Robotics and Automation.

[9]  Peter I. Corke,et al.  A robotics toolbox for MATLAB , 1996, IEEE Robotics Autom. Mag..

[10]  Alin Albu-Schäffer,et al.  Cartesian impedance control for a variable stiffness robot arm , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Sethu Vijayakumar,et al.  Exploiting Variable Stiffness in Explosive Movement Tasks , 2011, Robotics: Science and Systems.

[12]  Sungchul Kang,et al.  Two-arm cooperative assembly using force-guided control with adaptive accommodation , 1999, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289).

[13]  Jae-Bok Song,et al.  Preliminary experiments on robotic assembly using a hybrid-type variable stiffness actuator , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[14]  Daniel E. Whitney,et al.  Historical Perspective and State of the Art in Robot Force Control , 1985, Proceedings. 1985 IEEE International Conference on Robotics and Automation.

[15]  Bram Vanderborght,et al.  Exploiting Natural Dynamics to Reduce Energy Consumption by Controlling the Compliance of Soft Actuators , 2006, Int. J. Robotics Res..

[16]  Yasuhisa Hasegawa,et al.  Insertion of long peg into tandem shallow hole using search trajectory generation without force feedback , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[17]  Antonio Bicchi,et al.  Optimality principles in variable stiffness control: The VSA hammer , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[18]  Salvatore Nicosia,et al.  A new approach to control elastic joint robots with application to adaptive control , 1991, [1991] Proceedings of the 30th IEEE Conference on Decision and Control.

[19]  Jae-Bok Song,et al.  Hybrid dual actuator unit: A design of a variable stiffness actuator based on an adjustable moment arm mechanism , 2010, 2010 IEEE International Conference on Robotics and Automation.

[20]  Alessandro De Luca,et al.  Dynamic gravity cancellation in robots with flexible transmissions , 2010, 49th IEEE Conference on Decision and Control (CDC).

[21]  Nikolaos G. Tsagarakis,et al.  VSA-CubeBot: A modular variable stiffness platform for multiple degrees of freedom robots , 2011, 2011 IEEE International Conference on Robotics and Automation.

[22]  Matthew T. Mason,et al.  Compliance and Force Control for Computer Controlled Manipulators , 1981, IEEE Transactions on Systems, Man, and Cybernetics.

[23]  Michael Erdmann,et al.  Randomization in Robot Tasks , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[24]  Alin Albu-Schaffer,et al.  Optimal Control for Maximizing Link Velocity of Robotic Variable Stiffness Joints , 2011 .

[25]  Neville Hogan,et al.  Impedance Control: An Approach to Manipulation , 1984, 1984 American Control Conference.

[26]  Giorgio Grioli,et al.  VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans , 2008, 2008 IEEE International Conference on Robotics and Automation.

[27]  Joel E. Chestnutt,et al.  An actuator with physically variable stiffness for highly dynamic legged locomotion , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[28]  Xinhan Huang,et al.  Dynamic analysis of assembly process with passive compliance for robot manipulators , 2003, Proceedings 2003 IEEE International Symposium on Computational Intelligence in Robotics and Automation. Computational Intelligence in Robotics and Automation for the New Millennium (Cat. No.03EX694).

[29]  Antonio Bicchi,et al.  Optimality principles in stiffness control: The VSA kick , 2012, 2012 IEEE International Conference on Robotics and Automation.

[30]  H. Harry Asada,et al.  The dynamic RCC hand for high-speed assembly , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[31]  Manuel G. Catalano,et al.  Passive impedance control of a multi-DOF VSA-CubeBot manipulator , 2012, 2012 IEEE International Conference on Robotics and Automation.

[32]  Mark W. Spong,et al.  On the force control problem for flexible joint manipulators , 1989 .

[33]  A. Bicchi,et al.  Safe and fast actuators for machines interacting with humans , 2004, IEEE Conference on Robotics and Automation, 2004. TExCRA Technical Exhibition Based..