Adaptive, Anthropomorphic Robot Hands for Grasping and In-Hand Manipulation

[1]  Matei T. Ciocarlie,et al.  Grasp analysis using deformable fingers , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Y. Matsuoka,et al.  Mechanisms of the Anatomically Correct Testbed Hand , 2013, IEEE/ASME Transactions on Mechatronics.

[3]  M. Goldfarb,et al.  Design of a Multifunctional Anthropomorphic Prosthetic Hand With Extrinsic Actuation , 2009, IEEE/ASME Transactions on Mechatronics.

[4]  Mark R. Cutkosky,et al.  Design and testing of a selectively compliant underactuated hand , 2014, Int. J. Robotics Res..

[5]  Daniel Thalmann,et al.  The Making of a 3D-Printed, Cable-Driven, Single-Model, Lightweight Humanoid Robotic Hand , 2017, Front. Robot. AI.

[6]  Gianluca Palli,et al.  Development of UB Hand 3: Early Results , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[7]  Cosimo Della Santina,et al.  Dexterity augmentation on a synergistic hand: The Pisa/IIT SoftHand+ , 2015, 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids).

[8]  Aaron M. Dollar,et al.  Hybrid Deposition Manufacturing: Design Strategies for Multimaterial Mechanisms Via Three-Dimensional Printing and Material Deposition , 2015 .

[9]  Edward J. Park,et al.  A shape memory alloy-based tendon-driven actuation system for biomimetic artificial fingers, part I: design and evaluation , 2009, Robotica.

[10]  Panagiotis K. Artemiadis,et al.  Quantifying anthropomorphism of robot hands , 2013, 2013 IEEE International Conference on Robotics and Automation.

[11]  Haruhisa Kawasaki,et al.  Dexterous anthropomorphic robot hand with distributed tactile sensor: Gifu hand II , 1999, IEEE SMC'99 Conference Proceedings. 1999 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.99CH37028).

[12]  Kostas J. Kyriakopoulos,et al.  OpenBionics: An Open-Source Initiative for the Creation of Affordable, Modular, Light-Weight, Underactuated Robot Hands and Prosthetic Devices , 2014 .

[13]  P. Coullet,et al.  On the critical equilibrium of the spiral spring pendulum , 2010, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[14]  Aaron M. Dollar,et al.  Linkage-Based Analysis and Optimization of an Underactuated Planar Manipulator for In-Hand Manipulation , 2014 .

[15]  Matei T. Ciocarlie,et al.  Hand Posture Subspaces for Dexterous Robotic Grasping , 2009, Int. J. Robotics Res..

[16]  Kostas J. Kyriakopoulos,et al.  Open-source, low-cost, compliant, modular, underactuated fingers: Towards affordable prostheses for partial hand amputations , 2014, 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[17]  Kostas J. Kyriakopoulos,et al.  Open-source, anthropomorphic, underactuated robot hands with a selectively lockable differential mechanism: Towards affordable prostheses , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[18]  Sridhar Kota,et al.  Design of Compliant Mechanisms: Applications to MEMS , 2001 .

[19]  Julio Fajardo,et al.  An Affordable open-source multifunctional upper-limb prosthesis with intrinsic actuation , 2017, 2017 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO).

[20]  Tariq Rahman,et al.  A simple technique to passively gravity-balance articulated mechanisms , 1995 .

[21]  Y. Matsuoka,et al.  Design of an anthropomorphic robotic finger system with biomimetic artificial joints , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[22]  Gianluca Palli,et al.  Modeling, design, and experimental evaluation of rotational elastic joints for underactuated robotic fingers , 2017, 2017 IEEE-RAS 17th International Conference on Humanoid Robotics (Humanoids).

[23]  Caihua Xiong,et al.  Design and Implementation of an Anthropomorphic Hand for Replicating Human Grasping Functions , 2016, IEEE Transactions on Robotics.

[24]  J. F. Soechting,et al.  Postural Hand Synergies for Tool Use , 1998, The Journal of Neuroscience.

[25]  Tianjian Chen,et al.  Underactuated Hand Design Using Mechanically Realizable Manifolds , 2018, 2018 IEEE International Conference on Robotics and Automation (ICRA).

[26]  Sangbae Kim,et al.  SpinybotII: climbing hard walls with compliant microspines , 2005, ICAR '05. Proceedings., 12th International Conference on Advanced Robotics, 2005..

[27]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[28]  Kostas J. Kyriakopoulos,et al.  Open-source, affordable, modular, light-weight, underactuated robot hands , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[29]  Oliver Brock,et al.  A novel type of compliant and underactuated robotic hand for dexterous grasping , 2016, Int. J. Robotics Res..

[30]  Sangbae Kim,et al.  Design and fabrication of multi-material structures for bioinspired robots , 2009, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[31]  Emanuel Todorov,et al.  Design of a highly biomimetic anthropomorphic robotic hand towards artificial limb regeneration , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[32]  Ashish D. Deshpande,et al.  A novel joint design for robotic hands with humanlike nonlinear compliance , 2016 .

[33]  B. Buchholz,et al.  Anthropometric data for describing the kinematics of the human hand. , 1992, Ergonomics.

[34]  Clément Gosselin,et al.  Kinematic design of a planar and spherical mechanism for the abduction of the fingers of an anthropomorphic robotic Hand , 2011, 2011 IEEE International Conference on Robotics and Automation.

[35]  Hyoukryeol Choi,et al.  Double active universal joint (DAUJ): robotic joint mechanism for human-like motions , 2001, IEEE Trans. Robotics Autom..

[36]  Hong Liu,et al.  DLR-Hand II: next generation of a dextrous robot hand , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[37]  Larry L. Howell,et al.  A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots , 1994 .

[38]  Manuel G. Catalano,et al.  Adaptive synergies for the design and control of the Pisa/IIT SoftHand , 2014, Int. J. Robotics Res..

[39]  Aaron M. Dollar,et al.  M2 Gripper: Extending the Dexterity of a Simple, Underactuated Gripper , 2016 .

[40]  Aaron M. Dollar,et al.  The Smooth Curvature Model: An Efficient Representation of Euler–Bernoulli Flexures as Robot Joints , 2012, IEEE Transactions on Robotics.

[41]  Chris Lovchik,et al.  The Robonaut hand: a dexterous robot hand for space , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[42]  M SpinksGeoffrey,et al.  3D Printed Flexure Hinges for Soft Monolithic Prosthetic Fingers , 2016 .

[43]  Robert D. Howe,et al.  The Highly Adaptive SDM Hand: Design and Performance Evaluation , 2010, Int. J. Robotics Res..

[44]  Matei T. Ciocarlie,et al.  The Velo gripper: A versatile single-actuator design for enveloping, parallel and fingertip grasps , 2014, Int. J. Robotics Res..

[45]  Antonio Morales,et al.  Grasp modelling with a biomechanical model of the hand , 2014, Computer methods in biomechanics and biomedical engineering.

[46]  Alexander Leonessa,et al.  Team VALOR’s ESCHER: A Novel Electromechanical Biped for the DARPA Robotics Challenge , 2017 .

[47]  Robert D. Howe,et al.  A compliant, underactuated hand for robust manipulation , 2013, Int. J. Robotics Res..

[48]  Aaron M. Dollar,et al.  Disturbance Response of Two-Link Underactuated Serial-Link Chains , 2012 .

[49]  H. Harry Asada,et al.  Inter-finger coordination and postural synergies in robot hands via mechanical implementation of principal components analysis , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[50]  Nicolae Lobontiu,et al.  Corner-Filleted Flexure Hinges , 2001 .

[51]  Clément Gosselin,et al.  Kinetostatic analysis of underactuated fingers , 2004, IEEE Transactions on Robotics and Automation.

[52]  A. Kapandji.  Comprar The Physiology of the Joints Volume 1 Upper Limb | Adalbert I. Kapandji | 9780443103506 | Churchill Livingstone , 2007 .

[53]  Manuel G. Catalano,et al.  Toward Dexterous Manipulation With Augmented Adaptive Synergies: The Pisa/IIT SoftHand 2 , 2018, IEEE Transactions on Robotics.

[54]  Oussama Khatib,et al.  The Ocean One hands: An adaptive design for robust marine manipulation , 2017, Int. J. Robotics Res..

[55]  Antonio Bicchi,et al.  Hands for dexterous manipulation and robust grasping: a difficult road toward simplicity , 2000, IEEE Trans. Robotics Autom..

[56]  Ashish D. Deshpande,et al.  Development and validation of modeling framework for interconnected tendon networks in robotic and human fingers , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[57]  Anthony Tzes,et al.  Development and Control of a Multifunctional Prosthetic Hand with Shape Memory Alloy Actuators , 2015, J. Intell. Robotic Syst..

[58]  Siddhartha S. Srinivasa,et al.  Extrinsic dexterity: In-hand manipulation with external forces , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).